International Journal 

2022

  1. Hongsriphan, N., Subsanga, J., Suebsai, P., Sitthipong, S., and Patanathabutr, P. (2022). “Use of oil palm frond waste to reinforce poly(lactic acid) based composites with the improvement of interfacial adhesion by alkali treatment” Journal of Metals, Materials and Minerals, 32(1), (March 2022): 134–143. (Scopus)
  2. Hongsriphan, N., Jamjalern, C., Thikulwong, P., Yooyen, R., and Patanathabutr, P. (2022). “Properties of Recycled Poly(Lactic Acid) Contaminated with Poly(Ethylene Terephthalate)” Key Engineering Materials 914, (March 2022): 181-186. (Scopus)
  3. Patanathabutr, P., Chutam, J., Eiiamso, C., Surakit, A., and Hongsriphan, N. (2022). “The Recycling Feasibility of Disposable Face Masks by Compression Molding” Key Engineering Materials 914, (March 2022): 169-174. (Scopus)
  4. Liu, Y., Deng, S., Chen, L., Zhang, A., Suttiruengwong, S., and Sun, Z. (2022). “Spectroscopic characterization of soil dissolved organic matter during dielectric barrier discharge (DBD) plasma treatment: Effects of discharge power, atmosphere and soil moisture content” Chemosphere 297, (June 2022): 134145. (Scopus)
  5. Jongpanya-Ngam, P., Khankrua, R., Seadan, M., and Suttiruengwong, S. (2022). “Effect of synthesized sulfonate derivatives as nucleating agents on crystallization behavior of poly(lactic acid)” Designed Monomers and Polymers 25(1), (May 2022): 115–127. (Scopus)
  6. Loryuenyong, V., Juikatu, P., Sirisukha, P., Kumleing, U., and Buasri, A. (2022). “The preparation of luminescent and reversible thermochromic Mn-doped Ca-Zn-Al-O inorganic materials” Journal of Asian Ceramic Societies 2022, (Jul 2022): doi.org/10.1080/21870764.2022.2094558 (Scopus)
  7. Threepopnatkul, P., Charoendee, N., Wiriyamontree, N., and Phodaeng, A. (2022). “Effect of essential oil on properties of PBAT/PBS for bio-packaging films” Journal of Physics: Conference Series 2175(1), 012023. (Scopus)
  8. Sangthongdee, M., Phattarateera, S., and Threepopnatkul, P. (2022). “Effect of Pregelatinized Starch on the Properties of Poly (Vinyl Alcohol) Film for the Water-Soluble Laundry Bag” Chiang Mai Journal of Science 49(6), (November 2022): 1604–1617. (Scopus)
  9. Leelaruedee, K., Leelachao, S., Kuwahara, H., Yongvanich, N., Waree, K., Wongpisan, W., Wutikhun, T., Lothongkum, G., and Visuttipitukul, P. (2022). “Electrochemical and surface chemistry of amorphous chromium-zirconium film prepared by magnetron sputtering” Surfaces and Interfaces 31, (July 2022): 102036. (Scopus)
  10. Phongtongpasuk, S., Kedpratum, S., and Yongvanich, N. (2022). “Exposure of ananas comosus to zinc oxide nano-powder in vitro: physiology and bromelain production” Suranaree Journal of Science and Technology, 29(6), (2022): 030089. (Scopus)
  11. Sareein, T., Phuengpen, K., Limchalerm, W., Triamnak, N., Wongdamnern, N., Kaewkhao J., and Yimnirun, R. (2022). “Ultra-Wideband Dielectric and Impedance Spectroscopy of B2O3–Bi2O3–SiO2–Sm2O3Glasses” Integrated Ferroelectrics 223(1) : 38 – 45. (Scopus)
  12. Premwichit, P., Kosasang, O., Triamnak, N., and Prasertpalichat, S. (2022). “Effects of Nd3+ Donor Doping on Dielectric, Electrical Conductivity and Ferroelectric Properties of (Bi0.5Na0.5)0.93Ba0.07TiO3 Lead-Free Ceramics” Integrated Ferroelectrics 223(1) : 185 – 195. (Scopus)
  13. Wongdamnern, N., Triamnak, N., Sareein, T., and Yimnirun, R. (2022). “Ferroelectric-Thermoelectric Hybrid Property in La-Doped BaTiO3Polycrystalline Ceramics” Integrated Ferroelectrics 223(1) : 258 – 267. (Scopus)
  14. Phongsa, A., Rittisut, W., Wantana, N., Triamnak, N., Ngamsomrit, S., Rujirawat, S., Manyum, P., Prasatkhetragarn, A., Yimnirun, R., Kothan, S., Kim, H.J., Rajaramakrishna, R., and Kaewkhao, J. (2022). “White emission from Dy3+ doped Gd2O3-B2O3 glass for WLEDs encapsulation” Optik 265, (September 2022): 169532. (Scopus)
  15. Triamnak, N., Wongdamnern, N., Sareein, T., Ngamjarurojana, A., and Yimnirun, R. (2022). “Lowering Synthesis Temperature of BaTiO3-Bi(Zn0.5Zr0.5)O3 Ceramics by Salt Flux Assistance and Dielectric Properties Investigations” Integrated Ferroelectrics 223(1): 162 – 172. (Scopus)
  16. Chotigkrai, N., Tannititam, P., Piticharoenphun, S., Triamnak, N., Praserthdam, S., and Praserthdam, P. (2022). “The effect of Zn doping on active Cu species and its location of Cu-exchanged mordenite for the stepwise oxidation of methane to methanol” Korean Journal of Chemical Engineering 39(4), (January 2022):  920-927. (Scopus)
  17. Maneejark, K., Sangwaranatee, N., Chamchoi, N., Kulnides, N., Somboonsaksri, P., Limwichean, S., Pogfay, T., Kalasung, S., Eiamchai, P., Patthanasettakul, V.,Limsuwan, N., Triamnak, N., Nuntawong, N., and Horprathum, M. (2022). “Development of cost-effective fabrication process for on-site methamphetamine detection by adsorbable SERS substrate” Optical Materials 124, (February 2022): 111988. (Scopus)
  18. Prasertpalichat, S., Thongdee, N., Triamnak, N., and Wongdamnern, N. (2022). “Enhanced Energy Storage Properties in Lead-Free 0.92(Bi0.5Na0.5)TiO3–0.08BaTiO3 Ceramics via Ce Doping” Integrated Ferroelectrics 225(1), (May 2022): 104–116. (Scopus)
  19. Prasatkhetragarn, A., Sareein, T., Triamnak, N., and Yimnirun, R. (2022). “Dielectric and ferroelectric properties of modified-BaTiO3 lead-free ceramics prepared by solid solution method” Ferroelectrics 586(1), (Feb 2022): 224-241. (Scopus)
  20. Suwanchawalit, C., Deeleepojananan, C., Triamnak, N., Opanasopit, P., Laksee, S., and Suvokhiaw, S. (2022). “Preparation of organic dye-modified calcium-aluminum layered double hydroxide powders and their cytotoxicity” Digest Journal of Nanomaterials and Biostructures 17(3), (July – September 2022): 899-912. (Scopus)
  21. Rotjanasuworapong, K., Thummarungsan, N., Lerdwijitjarud, W., and Sirivat, A. (2022). “Electromechanical responses of agarose ionogels as highly soft and compliant actuators” European Polymer Journal 167, (March 2022): 111059. (Scopus)
  22. Sermsook, N., Thummarungsan, N., Rotjanasuworapong, K., Lerdwijitjarud, W., and Sirivat, A. (2022). “Fabrication and testing of functionalized multi-walled carbon nanotubes/deproteinized natural rubber composites for bending actuation under electric field” Sensors and Actuators A: Physical 344, (September 2022): 113762. (Scopus)

2021

  1. Teerasuchai, K., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2021). “Preparation and properties of poly(Butylene succinate) porous scaffold by fused deposition modeling and salt leaching techniques” Journal of Current Science and Technology2021, 11(2) : 334-341. (Scopus)
  2. Patanathabutr, P., and Hongsriphan, N. (2021). “Sappan natural dyed biocomposites from poly(Lactic acid) and aluminum silicate synthesized via sol-gel method from rice husk ash” Engineering Journal25(2) : 305-315. (ISI) (Scopus)
  3. Hongsriphan, N., Kaew-Ngam, C., Saengdet, P., and Kongtara, N. (2021). “Mechanical enhancement of biodegradable poly(Butylene succinate) by biobased polyamide11” Engineering Journal 25(2) : 295-304. (ISI) (Scopus)
  4. Hongsriphan, N., Thaisa, N., Yuenyong, W., Pruekchat, S., and Duangsripat, S. (2021). “Influence of internal mixing condition on properties of conductive biocomposites between poly(Lactic acid) and hybrid graphene” Key Engineering Materials 889 : 38 – 43. (Scopus)
  5. Phuangmali, I., Seadan, M., Khankrua, R., and Suttiruengwong, S. (2021). “Reactive compatibilization of poly(hydroxybutyrate-co-hydroxyvalerate)/polyvinyl alcohol blends” Polymer-Plastics Technology and Materials60(13) : 1461-1473. (ISI) (Scopus)
  6. Nuchanong, P., Seadan, M., Khankrua, R., and Suttiruengwong, S. (2021). “Thermal stability enhancement of poly(hydroxybutyrate-co-hydroxyvalerate) through in situ reaction” Designed Monomers and Polymers 24(1) : 113-122. (ISI) (Scopus)
  7. Thanawuth, K., Sutthapitaksakul, L., Konthong, S., Suttiruengwong, S., Huanbutta, K., Dass, C. R., and Sriamornsak, P. (2021). “Impact of Drug Loading Method on Drug Release from 3D-Printed Tablets Made from Filaments Fabricated by Hot-Melt Extrusion and Impregnation Processes” Pharmaceutics 13(10),1607 (Scopus)
  8. Kajornprai, T., Suttiruengwong, S., and Sirisinha, K. (2021). “Manipulating crystallization for simultaneous improvement of impact strength and heat resistance of plasticized poly(L-lactic acid) and poly(butylene succinate) blends” Polymers 13(18), 3066. (Scopus)
  9. Kowong, R., Denchitcharoen, S., Lertvanithphol, T., Triamnak, N., Chananonnawathorn, C., Jaruwongrungsee, K., Klamchuen, A., Muthitamongkol, P., Phae-ngam, W., Nakajima, H., Songsiriritthigul, P., and Horprathum, M. (2021). “Nanostructure optimization of Zr-W-Ti metallic glass thin films via multitarget co-sputtering with oblique angle deposition approach” Journal of Alloys and Compounds 886, (December 15 ) : 161265. (Scopus)
  10. Damdee, B., Kirdsiri, K., Kim, H.J., Yamanoi, K., Angnanon, A., Triamnak, N., Kothan, S., and Kaewkhao (2021). “Effect of Gd2O3concentration on X-rays induced and photoluminescence characteristics of Eu3+ – Activated Gd2O3–B2O3 glass” Radiation Physics and Chemistry 189, (December 2021) : 109681. (Scopus)
  11. Padchasri, J., Triamnak, N., Sareein, T., Jutimoosik, J., Tongsaeng, S., Bootchanont, A., Kidkhunthod, P., Rujirawat, S., Manyum, P., and Yimnirun, R. (2021). “Crystal structure and XANES study of Fe-substituted Barium Titanate ceramics prepared by conventional solid-state technique” Radiation Physics and Chemistry 188, (November 2021) : 109657. (Scopus)
  12. Girdthep, S., Hanmeng, O., Triamnak, N.,Chailek, N., and Wanichacheva, N. (2021). “Theoretical solvent selection for nanostructured surface fabrication of reusable and colourimetric visual-eye sensor strips with rhodamine derivative-encapsulated polymeric membranes for highly sensitive and selective detection of Hg2+” Polymer Testing 97 : 107151. (ISI) (Scopus)
  13. Kamonpha,P., Manyum, P., Chanthima, N.,Tariwong, Y.,Triamnak, N., Yimnirun, R.,Rujirawat, S., Kidkhunthod, P., Kothan, S., Kim, H.J., and Kaewkhao, J. (2021). “Structural and luminescence investigation of Ce3+doped lithium barium gadolinium phosphate glass scintillator” Radiation Physics and Chemistry 185, (August 2021) : 109488. (ISI)
  14. Khejonrak A., Chanlek N., Sukkha U., Triamnak N., Chirawatkul P., Kidkhunthod P., Suttapun M., Vittayakorn N., Manyum P., Rujirawat S., Songsiriritthigul P., and Yimnirun R. (2021). “Effect of thermal annealing on the structure of LiCoO2 powders prepared by co-precipitation method” Radiation Physics and Chemistry 189, (December 2021) : 109766. (Scopus)
  15. Boonin, K., Yasaka, P., Yamchumporn,P., Triamnak, N., Kothan, S., and Kaewkhao, J. (2021). “Scintillation respond and orange emission from Sm3+ ion doped tellurite and fluorotellurite glasses: A comparative study” Radiation Physics and Chemistry 189, (December 2021) : 109754.
  16. Rotjanasuworapong, K., Lerdwijitjarud, W., and Sirivat, A. (2021). “Synthesis and characterization of fe0.8 mn0.2 fe2 o4 ferrite nanoparticle with high saturation magnetization via the surfactant assisted co-precipitation” Nanomaterials 11(4) : 876. (ISI) (Scopus)
  17. Loryuenyong, V., and Buasri, A. (2021). “Preparation of Luminescent Glass Aggregates from Soda-Lime Waste Glass” International Journal of Photoenergy  20212021 : Article number 5951258 (SCOPUS)
  18. Yongvanich, N., Lithira, N., Nuniead, N., and Chauyarsa, W. (2021). “Synthesis and optical properties of forsterite ceramic pigments using mirror wastes as a flux” Journal of Metals, Materials and Minerals 31(4) : 108 – 115. (Scopus)

2020

  1. Hongsriphan, N., Somboon, K., Paujai, C., and Taengto, T. (2020). “Mechanical enhancement and thermal stability of composites between polyamide 11 and functionalized graphene nanoplatelets” Key Engineering Materials 858, (August 2020) : 59-65. (Scopus).
  2. Sooksaen, P., and Puathawee, P. (2020). “Fabrication of open-cell aluminum foams by pressure infiltration and salt leaching method from commercial grade alloys” Chiang Mai Journal of Science 47(4 Special Issue 2), (July 2020) : 673-685. (ISI) (Scopus)
  3. Rotjanasuworapong, K., Thummarungsan, N., Lerdwijitjarud, W., and Sirivat, A. (2020). “Facile formation of agarose hydrogel and electromechanical responses as electro-responsive hydrogel materials in actuator applications” Carbohydrate Polymers 247, (November 2020) : 1-11. (ISI) (Scopus)
  4. Rodchanasuripron, W., Seadan, M., and Suttiruengwong, S. (2020). “Properties of non-woven polylactic acid fibers prepared by the rotational jet spinning method” Materials Today Sustainability 10, (December 2020) : 1-7. (Scopus)
  5. Hongthipwaree, T., Sriamornsak, P., Seadan, M., and Suttiruengwong, S. (2020). “Effect of cosolvent on properties of non-woven porous neomycin-loaded poly(lactic acid)/polycaprolactone fibers” Materials Today Sustainability 10, (December 2020) : 1-6. (Scopus)
  6. Threepopnatkul, P., Wongsuton, K., Jaiaue, C., Rakkietwinai, N., Stittatrakul, A., and Kulsetthanchalee, C. (2020). “Effect of Zeolite on Mechanical and Barrier Properties of PBAT Films for Life Extension of Agricultural Products” Key Engineering Materials 861, (September 2020) : 176–181. (Scopus)
  7. Leelaruedee, K., Kuwahara, H., Khamkongkaeo, A., Yongvanich, N., Chanlek, N., Kidkhunthod, P., Leelachao, S., and Visuttipitukul, P. (2020). “Effect of zirconium addition on the phase evolution of chromium zirconium nitride prepared by magnetron sputtering” Materials Testing 62(8), (August) :783-787. (ISI) (Scopus)
  8. Aiempanakit, M., Lumpol, V., Mangsup, T., Triamnak, N., Sritharathikun, J., and Suwanchawalit, C. (2020). “Fabrication of titanium dioxide nanotubes and their photovoltaic performance for dye-sensitized solar cells” International Journal of ELECTROCHEMICAL SCIENCE 15(10), (OCT 2020) : 10392-10405. (ISI) (Scopus)

2019

  1. Dankeaw, A., Gualandris, F., Silva, R.H., Scipioni, R., Hansen, K.K., Ksapabutr, B., Esposito, V., and Marani, D. (2019). “Highly porous Ce-W-TiO 2free-standing electrospun catalytic membranes for efficient de-NO x via ammonia selective catalytic reduction” Environmental Science: Nano 6(1), (2019) : 94-104. (ISI) (Scopus).
  2. Hongsriphan, N., and Pinpueng, A. (2019). “Properties of Agricultural Films Prepared from Biodegradable Poly(Butylene Succinate) Adding Natural Sorbent and Fertilizer” Journal of Polymers and the Environment 27(2), (February 2019) : 434-443. (ISI) (Scopus)
  3. Hongsriphan, N., Viratchaiboot, N., Indrasook, P., and Hanbuakaeo, S. (2019). “Preparation and properties of composite films from poly(Butylene Succinate), Poly(Butylene Adipate-co-Terephthalate) and zeolite” Key Engineering Materials 798 KEM, (2019) : 285-290. (Scopus)
  4. Hongsriphan, N., Samangain, S., Siriteeraphan, Y., and Yangcheepyuenyoodee, N. (2019). “Poly(Butylene Succinate) and recycled poly(Ethylene Terephthalate) blends adding GMA as compatibilizer: Mechanical properties and chemical resistance to household chemicals” Key Engineering Materials 798, (2019) : 291-297. (Scopus)
  5. Hongsriphan, N., Dang-Arsa, S., Saklo, K., and Thongsima, T. (2019) “Development of breathable films from blends of low-density polyethylene and thermoplastic polyester elastomer” Key Engineering Materials 824, (October 2019) : 134-141. (Scopus)
  6. Patanathabutr, P., Soysang, P., Leuang-On, P., Kasetsupsin, P., and Hongsriphan, N. (2019). “A case study of recycled poly(Lactic Acid) contaminated with petroleum-based thermoplastics used in packaging application” Key Engineering Materials 798, (2019) : 279-284. (Scopus)
  7. Taweesup, K., Visuttipitukul, P., Yongvanich, N., and Lothongkum, G. (2019). “Corrosion behavior of Ti-Cr-N coatings on tool steel substrates prepared using DC magnetron sputtering at low growth temperatures” Surface and Coatings Technology 358, (25 January 2019) : 732-740. (ISI) (Scopus)
  8. Phongtongpasuk, S., Norasingsatorn, T., and Yongvanich, N. (2019). “Effect of ph on the environmentally friendly fabrication of silver nanoparticles using rambutan peel extract” Key Engineering Materials 824, (October 2019) : 149-155. (Scopus)
  9. Thongpin, C., and  Tanprasert, T. (2019). “Dynamic vulcanization of NR/PCL blends: Effect of rotor speed on morphology, tensile properties and tension Set” Key Engineering Materials 798, (2019) : 337-342. (Scopus)
  10. Sooksaen, P. (2019). “Physical properties and microstructures of ceramics fabricated from Mae Moh lignite bottom ash” Key Engineering Materials 801, (2019) : 292-297. (Scopus)
  11. Loryuenyong, V., Thongpon, P., Saudmalai, S., and Buasri, A. (2019). “The synthesis of 2D CH 3NH 3 PbI 3 perovskite films with tunable bandgaps by solution deposition route” International Journal of Photoenergy 2019, (2019) : Article number 7492453. (ISI) (Scopus)
  12. Loryuenyong, V., Kulchartchai, P., Audomcharoensak, P., Jeyakom, P., and Buasri, A. (2019). “Effects of mixed halide ions incorporation on ch3nh3pb(I,br)3-x(scn)x perovskite films via solution deposition route” Key Engineering Materials  821, (September 2019) : 395-400. (Scopus)
  13. Loryuenyong, V., Kaewmeesri, P., Siritanon, R., Nilwadee, S., and Buasri, A. (2019). “The Enhancement of Photoanode Efficiency in Dye-Sensitized Solar Cells with TiO2/Graphene Nanocomposite” JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 19(12), (DEC 2019) : 7702-7706. DOI: 10.1166/jnn.2019.16843 (ISI)
  14. Aiempanakit, M., Tabtimsri, T., Triamnak, N., and Suwanchawalit, C. (2019). “Curcumin modified titanium dioxide nanotubes with enhanced visible light photocatalytic performance” International Journal of Electrochemical Science 14(2), (1 February 2019) : 1954-1967. (ISI) (Scopus)
  15. Saeaeh, K., Thummarungsan, N., Paradee, N., Choeichom, P., Phasuksom, K., Lerdwijitjarud, W., and Sirivat, A. (2019). “Soft and highly responsive multi-walled carbon nanotube/pullulan hydrogel composites as electroactive materials” EUROPEAN POLYMER JOURNAL 120 (NOV 2019) : Article Number: UNSP 109231 DOI: 10.1016/j.eurpolymj.2019.109231 (ISI) (Scopus)
  16. Khankrua, R., Pongpanit, T.,  Paneetjit, P., Boonmark, R.,   Seadan, M., and  Suttiruengwong, S. (2019). “Development of PLA/EVA Reactive Blends for Heat-Shrinkable Film” Polymers 2019, 11(12), 1925; https://doi.org/10.3390/polym11121925 (December 2019) (Scopus)
  17. Threepopnatkul, P., Sittatrakul, A., Anuraka, K., Mekmok, O., Khunkaew, A., Kulsetthanchalee, C., and Moustafa, H. (2019). “Preparation and properties of polylactide reinforced with eggshell modified with different fatty acids” Key Engineering Materials 824, (October 2019) : 16-22. (Scopus)

2018

  1. Hongsriphan, N., and  Sanga, S. (2018). “Antibacterial food packaging sheets prepared by coating chitosan on corona-treated extruded poly(lactic acid)/poly(butylene succinate) blends” JOURNAL OF PLASTIC FILM & SHEETING 34(2),  (APR 2018) : 160-178. (ISI) (Scopus)
  2. Hongsriphan, N., Patanathabutr, P., and Lappokachai, K. (2018) “Tensile and impact properties of recycled poly(Ethylene terephthalate) and polycarbonate composites reinforced with silane treated hollow glass microspheres” Key Engineering Materials 772, (2018) : 33-37. (Scopus)
  3. Hongsriphan, N., Jeensikhong, K., Sornnuwat, K., and  Yaemyen, N. (2018). “Properties of Renewable Biocomposite from Poly(butylene succinate) and Teakwood Sawdust before and after Accelerated Weathering Condition” JOURNAL OF BIONIC ENGINEERING 15(6), (NOV 2018) : 1075-1086. (ISI) (Scopus)
  4. Hongsriphan, N., Borkaew, K., Peson, U.-L., and  Pumpruck, W. (2018). “Thermoplastic composites between polybutylene succinate and recycled PET adding hollow glass microspheres” International Journal of Plastics Technology 22(2), (December 2018) : 312-325. (ISI) (Scopus)
  5. Dankeaw, A., Gualandris, F., Silva, RH, Norrman, K., Gudik-Sorensen, M., Hansen, KK., Ksapabutr, B., Esposito, V., and Marani, D. (2018). “Amorphous saturated cerium-tungsten-titanium oxide nanofiber catalysts for NOx selective catalytic reaction” NEW JOURNAL OF CHEMISTRY 42(12), (JUN 21 2018) : 9501-9509. DOI: 10.1039/c8nj00752g (ISI) (Scopus)
  6. Lorkit, P., Phatharapeetranun, N., Ksapabutr, B., Wongkasemjit, S., Chaiyut, N., and Panapoy, M. (2018). “Double-layered TiO2/activated carbon films with enhanced photocatalytic activity towards methylene blue degradation” OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS 12(5-6), (MAY-JUN 2018) : 347-352. (ISI) (Scopus)
  7. Gadea, C., Phatharapeetranun, N., Ksapabutr, B., Grivel, JC., and Esposito, V. (2018). “Stoichiometric control in Bi4Ti3O12 synthesis by novel hybrid solid state reaction” MATERIALS LETTERS 221, (JUN 15 2018) : 101-103. DOI: 10.1016/j.matlet.2018.03.130 (ISI) (Scopus)
  8. Yongvanich, N., Supanichwatin, K., Penglan, J., and Triamnak, N. (2018). “Synthesis and Characterizations of (COxMg(2-x))SiO4 Forsterite Ceramic Pigments from Mirror Waste” MATERIALS 11(7), (JUL 2018) :Article Number: 1210. DOI: 10.3390/ma11071210. (ISI) (Scopus)
  9. Yongvanich, N., Thongkaew, K., Yuanlae, N., Sae-ung, S., and Suwanchawalit, C. (2018). “Influence of Copper Doping in Nanostructured ZnO Thin Films by Spin Coating” IEEE Transactions on Nanotechnology 17(6), (November 2018) : 1125-1128. (ISI)(Scopus)
  10. Yongvanich, N., Wangwanich, N., and Phomwana, N. (2018). “Sol-gel Synthesis and Optical Properties of Malayaite Ceramic Colour Pigments” SAINS MALAYSIANA 47(3), (MAR 2018) : 581-587. DOI: 10.17576/jsm-2018-4703-19 (ISI) (Scopus)
  11. Yongvanich, N., Emtip, B., Hengprayoon, B., and Jankat, E. (2018). “Synthesis of spinel color pigments from aluminum dross waste” Key Engineering Materials 766, (2018) : 282-287. (Scopus)
  12. Yongvanich, N., Chanthanan, C., Ruennarong, N., and Suwanna, N. (2018). “Stability of Malayaite Pigments in High-ZnO Ceramic Glazes” Key Engineering Materials 772, (2018) : 90-94. (Scopus)
  13. Sooksaen, P., and Puathawee, P. (2018). “Fabrication of Porous Ceramics from Non-metallic Residue Obtained from Aluminum Recycling Plant” CHIANG MAI JOURNAL OF SCIENCE 45(2), (MAR 2018) : 1099-1110. (ISI) (Scopus)
  14. Sooksaen, P., Mekmork, K., Limprajuablarp, T., and Kuharuangrong, S. (2018). “Microwave synthesis of nanocrystalline hydroxyapatite and the application in bio-composite” Key Engineering Materials 766, (2018) : 228-232. (Scopus)
  15. Sooksaen, P., Boodpha, V., Janrawang, P., and Songkasupa, P. (2018). “Fabrication of lightweight concrete composites using natural fibers in Thailand” Key Engineering Materials 765, (2018) : 305-308. (Scopus)
  16. Sooksaen, P., Sathukan, P., Saetang, D., and Khunchomphu, N. (2018). “Utilization of Natural Fibers in the Fabrication of Lightweight Concretes” Materials Science Forum 934, (October) : 189-193. (Scopus)
  17. Buasri, A., Ojchariyakul, S., Kaewmanechai, P., Eakviriyapichat, W., and Loryuenyong, V. (2018). “The fabrication of multicolor electrochromic device based on graphene conductive ink/poly(Lactic acid) thin films by voltage-step method” Optoelectronics and Advanced Materials, Rapid Communications 12(7-8), (July-August 2018) : 388-393. (ISI) (Scopus)
  18. Loryuenyong, V., Jindawattanawong, B., Jaroenkun, P., Supannakool, A., and Buasri, A. (2018). “The fabrication of titanium dioxide-tin oxide/reduced graphene oxide photoanodes for dye-sensitized solar cells” Key Engineering Materials 780, (2018) : 32-36. (Scopus)
  19. Buasri, A., Prasanwon, C., Boonsong, B., Kohprasert, P., and Loryuenyong, V. (2018). “The fabrication of graphene-reinforced aluminum composites by powder metallurgy and uniaxial pressing” Key Engineering Materials 780, (2018) : 10-14. (Scopus)
  20. Buasri, A., Ojchariyakul, S., Kaewmanechai, P., Eakviriyapichat, W., and Loryuenyong, V. (2018). “The fabrication of multicolor electrochromic device based on RGO/BOPP using ag nanoparticles” Materials Science Forum 926, (2018) : 79-84. (Scopus)
  21. Buasri, A., Promsupa, W., Wannato, S., Wanta, S., and Loryuenyong, V. (2018). “The application of modified marlstones in biofuel technology” Materials Science Forum 926, (2018) : 101-106. (Scopus)
  22. Buasri, A., and Loryuenyong, V. (2018). “Continuous Production of Biodiesel from Rubber Seed Oil Using a Packed Bed Reactor with BaCl2 Impregnated CaO as Catalyst” BULLETIN OF CHEMICAL REACTION ENGINEERING AND CATALYSIS 13(2), (AUG 2018) : 320-330. DOI: 10.9767/bcrec.13.2.1585.320-330 (ISI) (Scopus)
  23. Loryuenyong, V., Sukitpong, J., Nakpong, C., Khadthiphong, A., and Buasri, A. (2018). “Platinum-Free Counter Electrodes Comprised of Polypyrrole-Graphene Composite” NANOSCIENCE AND NANOTECHNOLOGY LETTERS 10(5-6), (MAY 2018) : 717-721. DOI: 10.1166/nnl.2018.2645 (ISI)
  24. Loryuenyong, V., Khiaokaeo, N., Koomsin, W., Thongchu, S., and Buasri, A. (2018). “Crystallisation of CH3NH3PbX3 (X = I, Br, and Cl) trihalide perovskite using PbI2 and PbCl2 precursors” MICRO & NANO LETTERS 13(4), (APR 2018) : 486-489. DOI: 10.1049/mnl.2017.0341 (ISI) (Scopus)
  25. Kongkaew, W., Sangwan, W., Lerdwijitjarud, W., and Sirivat, A. (2018). “Soft poly(2-chloroaniline)/pectin hydrogel and its electromechanical properties” JOURNAL OF BIOMATERIALS APPLICATIONS 32(6), (JAN 2018) : 788-799. DOI: 10.1177/0885328217739457 (ISI) (Scopus)
  26. Tanusorn, N., Thummarungsan, N., Sangwan, W., Lerdwijitjarud, W., and Sirivat, A. (2018). “Influence of carrageenan molecular structures on electromechanical behaviours of poly(3-hexylthiophene)/carrageenan conductive hydrogels” INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES 118, (OCT 15 2018)  : 2098-2107. DOI: 10.1016/j.ijbiomac.2018.07.066 (ISI) (Scopus)
  27. Khwanpipat, T., Seadan, M., and Suttiruengwong, S. (2018) “Effect of PDLA and Amide Compounds as Mixed Nucleating Agents on Crystallization Behaviors of Poly (L-lactic Acid)” MATERIALS 11(7), (JUL 2018) : Article Number: 1139. DOI: 10.3390/ma11071139 (ISI) (Scopus)
  28. Nanthananon, P., Seadan, M., Pivsa-Art, S., Hamada, H., and Suttiruengwong, S. (2018). “Facile Preparation and Characterization of Short-Fiber and Talc Reinforced Poly(Lactic Acid) Hybrid Composite with In Situ Reactive Compatibilizers”MATERIALS 11(7), (JUL 2018) : Article Number: 1183. DOI: 10.3390/ma11071183 (ISI) (Scopus)
  29. Suttiruengwong, S., Pivsa-Art, S., and Chareonpanich, M. “Hydrophilic and Hydrophobic Mesoporous Silica Derived from Rice Husk Ash as a Potential Drug Carrier” MATERIALS 11(7), (JUL 2018) : Article Number: 1142. DOI: 10.3390/ma11071142 (ISI) (Scopus)
  30. Srisuwan, Y., Baimark, Y., and Suttiruengwong, S. (2018). “Toughening of Poly(L-lactide) with Blends of Poly(epsilon-caprolactone-co-L-lactide) in the Presence of Chain Extender” INTERNATIONAL JOURNAL OF BIOMATERIALS , (2018) : Article Number: 1294397. DOI: 10.1155/2018/1294397 (ISI) (Scopus)
  31. Nanthananon, P., Seadan, M., Pivsa-Art, S., Hamada, H.,and Suttiruengwong, S.  (2018). “Reactive Compatibilization of Short-Fiber Reinforced Poly(lactic acid) Biocomposites” JOURNAL OF RENEWABLE MATERIALS 6(6), (OCT 2018) : 573-583. DOI: 10.32604/JRM.2018.00129 (ISI)
  32. Wasantakorn, A., and  Chaiyanboon, T. (2018). “Utilization of ICE exhaust gas as a heat source for pyrolysis of natural rubber as automobile fuel” Journal of Renewable and Sustainable Energy 10, 064701 (2018) : doi.org/10.1063/1.5045246 (ISI) (Scopus)

2017

  1. Thongpin, C. Muanwong, A., Yanyongsak, J., and Lorphaitoon, P. (2017). “Effect of ENR Contents on Cure Characteristic and Properties of NR/ENR/EVA Foam” Materials Science Forum 889, (March): 45-50.
  2. Dankeaw, A., Poungchan, G., Panapoy, M., and Ksapabutr, B. (2017). “In-situ one-step method for fabricating three-dimensional grass-like carbon-doped ZrO2 films for room temperature alcohol and acetone sensors” Sensors and Actuators B: Chemical 242, (April) : 202-214. DOI: 10.1016/j.snb.2016.11.055 (ISI)
  3. Hongsriphan, N., Dangmanee, P., Mankrut, M., and Jantaraka, W.  (2017). “Mechanical and Thermal Properties of Eucalyptus Fiber Composites from Blend between Biodegradable Poly(butylene succinate) and Recycled PET” Journal of Metals, Materials and Minerals 27(1) : 13-23. (Scopus)
  4. Hemsri, S., Bunsripirat, P. and  Nakkarat, P. (2017). “Effect of Plasticizers on Morphology, Mechanical Properties and Water Absorption of Wheat Gluten and Epoxidized Natural Rubber Blend” Key Engineering Materials 737, (June) : 287-293. (Scopus)
  5. Threepopnatkul, P., Sukprasurt, N., Santiwiparat, P., Prom-Oh, W., and Kulsetthanchalee, C. (2017). “Effect of Glass Fiber Length and Content on Mechanical Properties of Polybutylene terephthalate” Journal of Metals, Materials and Minerals 27(1) : 31-34. (Scopus)
  6. Loryuenyong, V., Pluemmalung, K., Rattanapanya, P., Waeokhum, A., and Buasri, A. (2017). “The Reinforcement of Graphene Produced by Kitchen Blender in Cement Mortar” Key Engineering Materials 744, (July): 77-82. (Scopus)
  7. Buasri, A., Chaibundit, P., Kuboonprasert, M., Silajan, A., and Loryuenyong, V. (2017). “Preparation of KI-Impregnated Razor Clam Shell as a Catalyst and its Application in Biodiesel Production from Jatropha curcas Oil” Key Engineering Materials 744, (July) : 506-510. (Scopus)
  8. Buasri, A., Ongmali, D., Sriboonpeng, P., Prompanut, S., and Loryuenyong, V. (2017). “Development of transparent electrodes using graphene nano-ink and post-consumer PET bottles for electrochromic application” Key Engineering Materials 744, (July) : 463-467. (Scopus)
  9. Thongpin, C., Tippuwanan, C., Buaksuntear, K., and Chuawittayawut, T. (2017). “Mechanical and Thermal Properties of PLA Melt Blended with High Molecular Weight PEG Modified with Peroxide and Organo-Clay” Key Engineering Materials 751 (August) : 337-343. (Scopus)
  10. Ketkul, K., Threepopnatkul, P., Aussawasathien, D., and Hrimchum, K. (2017). “Poly(Lactic Acid)-Polybutylene Succinate-Activated Carbon Composite Foams” Key Engineering Materials 751 (August) : 344-349. (Scopus)
  11. Sooksaen, P., Saowaros, N., Ngamkaruhasereethorn, K., and Pringkasemchai, A. (2017). “Photocatalytic Degradation Study of Titania Sol-Gel Coated on Commercial Unglazed Ceramic Tiles” Key Engineering Materials 751 (August) : 819-824. (Scopus)
  12. Yongvanich, N., Sirijan, T.,  Larptaweechai, P., and Chatchawong, L. (2017). “Reduction of maturation point in crystalline glaze through frit addition” Monatshefte Fur Chemie 148(7), (July) : 1329-1335. DOI: 10.1007/s00706-017-1991-z (ISI) (Scopus)
  13. Yongvanich, N., Niyomtrum, K., Chairatanaset, C., and Srisethkul, T. (2017). “Enhancement of non-linear properties in SnO2 varistors by ZnO doping” Ceramics International 43 : S280-S285. Supplement: 1 DOI: 10.1016/j.ceramint.2017.05.307 (ISI) (Scopus)
  14. Leelaruedee, K., Visuttipitukul, P., and Yongvanich, N. (2017). “Effect of the Added Polyethylene Glycol Molecular Weight and Calcination Heating Rate on the Morphology of TiO2 Films Formed by Sol-Gel” Materials Transactions 58(3) : 465-470. DOI: 10.2320/matertrans.M2016274 (ISI) (Scopus)
  15. Sooksaen, P., and Chuankrerkkul, N. (2017). “Morphology-design and semiconducting characteristics of zinc oxide nanostructures under microwave irradiation” Integrated Ferroelectrics 177 (1) : 90-102 Special Issue: SI DOI: 10.1080/10584587.2017.1285194 (ISI) (Scopus)
  16. Hou, D., Usher, T.-M., Zhou, H., Raengthon, N., Triamnak, N., Cann, D.P., Forrester, J.S., and Jones, J.L. (2017). “Temperature-induced local and average structural changes in BaTiO3-x Bi(Zn1/2Ti1/2)O3 solid solutions: The origin of high temperature dielectric permittivity” Journal of Applied Physics 122(6), (August 14), Article number 064103. (ISI)
  17. Poadang, S., Yongvanich, N., and Phongtongpasuk, S. (2017). “Synthesis, Characterization, and Antibacterial Properties of Silver Nanoparticles Prepared from Aqueous Peel Extract of Pineapple, Ananas Comosus” Chiang Mai University Journal of Natural Sciences, 16(2) : 123-133. (Scopus)
  18. Sooksaen, P. and Puathawee, P. (2017). “Properties of Unglazed Ceramics Containing Aluminum Dross as a Major Component” Solid State Phenomena 266, (October) : 182-186. (Scopus)
  19. Loryuenyong, V., Intong, K., Pongpraphan, V., Suksakkhee, W., and Buasri, A. (2017). “Photocatalytic Application of Graphene-Based TiO2 Nanocomposite” Solid State Phenomena 266, (October) :79-83. (Scopus)
  20. Phatharapeetranun, N., Ksapabutr, B., Marani, D., Bowen, J. R., and  Esposito, V. (2017). “3D-printed barium titanate/poly-(vinylidene fluoride) nano-hybrids with anisotropic dielectric properties” Journal of Materials Chemistry C, 5 : 12430-12440. (ISI)
  21. Weerapol,Y., Limmatvapirat, S., Nunthanid, J., Konthong, S., Suttiruengwong, S. and Sriamornsak, P. (2017). “Development and characterization of nifedipine-amino methacrylate copolymer solid dispersion powders with various adsorbents” Asian Journal of Pharmaceutical Sciences 12(4), (July) : 335-343. (Scopus)
  22. Buasri, A., Ananganjanakit, T., Peangkom, N., Khantasema, P., Pleeram, K., Lakaeo, A., Arthnukarn, J., and Loryuenyong, V. (2017). “A facile route for the synthesis of reduced graphene oxide (RGO) by DVD III laser scribing and its applications in the environment-friendly electrochromic devices (ECD)” Journal of Optoelectronics and Advanced Materials 19(7-8), (July-August) : 492-500. (ISI) (Scopus)

2016

  1. Poungchan, G., Ksapabutr, B. and Panapoy, M. (2016). “One-step synthesis of flower-like carbon-doped ZrO2 for visible-light-responsive photocatalyst” Materials and Design 89, (JAN 5): 137-145. (ISI) (Scopus)
  2. Charoonrak, N., Tungkavet, T., Sirivat, A. and Lerdwijitjarud, W. (2016). “Poly(p-phenylene)/crosslinked poly(e-caprolactone) blends as highly electroactive materials” Materials Chemistry and Physics 171, (MAR 1): 359-366. (ISI)
  3. Sittirug, I., Ksapabutr, B. and Panapoy, M. (2016). “Freestanding hematite nanofiber membrane for visible-light-responsive photocatalyst” Ceramics International 42(3), (FEB 15): 3864-3875. (ISI) (Scopus)
  4. Kantawong, F., Tanum, J., Wattanutchariya, W. and Sooksaen, P. (2016). “Variation of Hydroxyapatite Content in Soft Gelatin Affects Mesenchymal Stem Cell Differentiation” Brazilian Archives of Biology and Technology 59, Article Number: e16150650, (2016): 9 Pages. (ISI)
  5. Sooksaen, P. and Puathawee, P. (2016). “Conversion of Aluminum Dross Residue into Value-added Ceramics” Key Engineering Materials 690, (MAY): 71-75. (Scopus)
  6. Sangkharat, N., Chaiyut, N., Ksapabutr, B.and Panapoy, M. (2016). “Single-step synthesis process of interconnected spiderweb-like TiO2 films as photoanode for self-powered ultraviolet-detector”, Ceramics International 42(5), (APR): 5858-5864. (ISI) (Scopus)
  7. Loryuenyong, V., Yaotrakool, S., Prathumted, P., Lertsiri, J. and Buasri, A. (2016). “Synergistic effects of graphene-polyaniline counter electrode in dye-sensitised solar cells” Micro & Nano Letters 11(2), (FEB): 77-80. (ISI) (Scopus)
  8. Loryuenyong, V., Buasri, A., Lerdvilainarit, P., Manachevakulm, K. and Sompong, S. (2016). “Production of Graphitic Carbon-based Nanocomposites from K2CO3-activated Coconut Shells as Counter Electrodes for Dye-sensitized Solar-cell Applications” Journal of the Korean Physical Society 68(2), (JAN): 317-322. (ISI) (Scopus)
  9. Loryuenyong, V., Charoensuk, J., Charupongtawitch, R., Usakulwattana, A. and Buasri, A. (2016). “Kinetics of Photocatalytic Degradation of Methylene Blue by Tio2-Graphene Nanocomposites” Journal of Nanoscience and Nanotechnology 16(1), (JAN): 296-302. (ISI) (Scopus)
  10. Loryuenyong, V., Pengthum, W., Thasatan, W. and Buasri, A. (2016). “A facile preparation of reduced graphene oxide papers for electrode and adsorption applications” Optoelectronics and Advanced Materials, Rapid Communications 10(5-6), (MAY-JUN): 417-421. (ISI) (Scopus)
  11. Buasri, A., Kampichit, U., Salacharoen, P., Sangsawee, P. and Loryuenyong, V. (2016). “The Improvement in Mechanical and Thermal Properties of Biodegradable Poly (Butylene Succinate) (PBS) Nanocomposites with Low Loadings of Graphene Oxide (XGO)” Materials Science Forum 872, (2016): 235-241. (Scopus)
  12. Sangkharat, N., Chalermkiti, T., Lorkit, P., Ksapabutr, B. and Panapoy, M. (2016). “Hierarchical nanostructured porous titania films supported on glass substrate with enhanced photocatalytic efficiency” Optoelectronics and Advanced Materials, Rapid Communications 10(3-4) (MAR-APR): 217-221. (ISI) (Scopus)
  13. Tanum, J., Udomsom, S., Wattanutchariya, W., Sooksaen, P., and Kantawong, F. (2016). “Characterization of Gelatin Composite with Low Content Hydroxyapatite and the Influence on Mesenchymal Stem Cell Culture” Key Engineering Materials 675-676, (2016): 473-476. (Scopus)
  14. Hemsri, S., Thongpin, C., Supatti, N., Manomai, P. and Socharoentham, A. (2016). “Bio-based blends of wheat gluten and maleated natural rubber: morphology, mechanical properties and water absorption” Energy Procedia 89 (2016): 264-273. (Scopus)
  15. Kattiyaboot, T. and Thongpin, C. (2016) “Effect of natural oil based polyols on the properties of flexible polyurethane foams blown by distilled water” Energy Procedia 89, (2016): 177-185. (Scopus)
  16. Wachirahuttapong, S., Thongpin, C. and Sombatsompop, N. (2016). “Effect of PCL and compatibility contents on the morphology, crystallization and mechanical properties of PLA/PCL blends” Energy Procedia 89, (2016): 198-206. (Scopus)
  17. Kraitape, N. and Thongpin, C. (2016) “Influence of recycled polyurethane polyol on the properties of flexible polyurethane foams”  Energy Procedia 89, (2016): 186-197. (Scopus)
  18. Talbamrung, T., Kasemsook, C., Sangtean, W., Wachirahuttapong, S. and Thongpin, C. (2016). “Effect of Peroxide and Organoclay on Thermal and Mechanical Properties of PLA in PLA/NBR melted blend” Energy Procedia 89, (2016): 274-281. (Scopus)
  19. Phongtongpasuk, S., Poadang, S. and Yongvanich, N. (2016). “Environmental-friendly method for synthesis of silver nanoparticles from dragon fruit peel extract and their antibacterial activities” Energy Procedia 89, (2016): 239-247. (Scopus)
  20. Sangwan, W., Petcharoen, K., Paradee, N., Lerdwijitjarud, W. and Sirivat, A. (2016). “Electrically responsive materials based on polycarbazole/sodium alginate hydrogel blend for soft and flexible actuator application” Carbohydrate Polymers 151, (OCT 20): 213-222. (ISI) (Scopus)
  21. Sriamornsak, P., Konthong, S., Limmatvapirat, S., and Suttiruengwong, S. (2016). “Dissolution improvement by solid dispersions composed of nifedipine, Eudragit® E and silica from rice husk”  Asian Journal of Pharmaceutical Sciences 11(1), (February 01): 195-196. (Scopus)
  22. Buasri, A.,Lukkanasiri, M., Nernrimnong, R.,  Tonseeya, S.,  Rochanakit, K., Wongvitvichot, W., Masa-ard, U., and Loryuenyong, V. (2016). “Rapid transesterification of Jatropha curcas oil to biodiesel using novel catalyst with a microwave heating system” Korean Journal Of Chemical Engineering 33(12), (DEC): 3388-3400. (ISI) (Scopus)
  23. Usher, TM., Iamsasri, T., Forrester, JS., Raengthon, N., Triamnak, N., Cann, DP., and Jones, JL. (2016). “Local and average structures of BaTiO3-Bi(Zn1/2Ti1/2)O3” JOURNAL OF APPLIED PHYSICS 120(18), (NOV 14): Article Number: 184102. (ISI) (Scopus)

2015

  1. Sooksaen, P., and Karawatthanaworrakul, S. (2015). “The properties of Southern Thailand clay-based porous ceramics fabricated from different pore size templates” Applied Clay Science 104, 295-302.  (scopus)
  2. Loryuenyong, V., Phongthongcharoen, J., Klomchit, K., Chaiklang, R., and Buasri, A. (2015). “A facile route for the synthesis of graphitic carbon-Fe-based nanocomposites from K2CO3-activated sugarcane bagasse” Optoelectronics and Advanced Materials-Rapid Communications 9(1-2), (JAN-FEB 2015): 218-221.  (scopus)
  3. Buasri, A., and Loryuenyong, V. (2015). “Photodegradation and thermal properties of biopolymer nanocomposites based on poly(butylene succinate) and modified titanium dioxide” Optoelectronics and Advanced Materials-Rapid Communications 9(1-2), (JAN-FEB 2015): 61-66. (scopus)
  4. Buasri, A., Rattanapan, T., Boonrin, C., Wechayan, C., and Loryuenyong, V. (2015). “Oyster and Pyramidella Shells as Heterogeneous Catalysts for the Microwave-Assisted Biodiesel Production from Jatropha curcas oil” Journal of Chemistry 2015, Article ID578625. (scopus)
  5. Buasri, A., Patwiwattanasiri, J., Adisaisakunchai, N., Kemngen, A., and Loryuengyong, V. (2015). “The production and properties of polylactide (PLA) nanocomposites filled with graghene oxide (XGO)” Optoelectronics and Advanced Materials-Rapid Communications 9(3-4), (March-April 2015): 507-510. (scopus)
  6. Ksapabutr, B., Nimnuan, P., and Panapoy, M. (2015). “Dense and uniform NiO thin films fabricated by one-step electrostatic spray deposition” Materials Letters 153 : 24-28. (scopus)
  7. Lopattananon, N., Julyanon, J., Masa, A., Kaesaman, A., Thongpin, C., and Sakai, T. (2015). “The Role of Nanofillers on (Natural Rubber)/(Ethylene Vinyl Acetate)/Clay Nanocomposite in Blending and Foaming” JOURNAL OF VINYL & ADDITIVE TECHNOLOGY 21(2), (JUN 2015): 134-146. (scopus)
  8. Buasri, A., Inkaew, T., Kodephun, L., Yenying, W., and Loryuenyong, V. (2015). “Natural Hydroxyapatite (NHAp) Derived from Pork Bone as a Renewable Catalyst for Biodiesel Production via Microwave Irradiaton” Key Engineering Materials 659, (AUG 2015): 216-220. (scopus)
  9. Buasri, A., Sriboonraung, T., Ruangnam, K., Imsombati, P., and Loryuenyong, V. (2015). “Utilization of Waste Enamel Venus Shell as Friendly Environmental Catalyst for Synthesis of Biodiesel” Key Engineering Materials 659, (AUG 2015): 237-241. (scopus)
  10. Sooksaen, P. (2015). “Morphology and phase composition of sol-gel derived aluminum borate nanowhiskers” Key Engineering Materials, Vol.659, 121-126. AUG 2015. (scopus)
  11. Thongpin, C., Chaemprasith, K., Teeralertpanich, J., Saensuk, P., and Kritape, N. (2015). “In-situ reinforcement of PLA using Nylon 6 in PLA/Nylon 6 extrudate blend via twin-screw extrusion” Key Engineering Materials 659, (AUG 2015): 428-435. (scopus)
  12. Sooksaen, P., Keawpimol, A., Deeniam, P., and Boonkum. P. (2015). “Surface modification of zinc oxide nanoparticles using polyethylene glycol under microwave radiation” Key Engineering Materials 659, (AUG 2015): 609-614. (scopus)
  13. Sooksaen, P., Janmat, P., Thovasakul, W., and Chulasinont, O. (2015). “Low cost synthesis of hydrophobic aluminium alloy for self-cleaning applications” Key Engineering Materials 659, (AUG 2015): 565-569. (scopus)
  14. Yongvanich, N., Srithong, K., Kaewbudsa, W., and Visuttipitukul, P. (2015). “New Cr-doped SrTiO3 ceramic color pigments” Applied Mechanic and Materials 709: 346-349. (SJR)
  15. Threepopnatkul, P., Kulsetthanchalee, C., A., and Kaewjinda, E. (2015). “Effect of EMA and antioxidants on properties of thermoplastic starch blown films” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012061. (scopus)
  16. Likittanaprasong, N., Seadan, M., and Suttiruengwong, S. (2015). “Impact property enhancement of poly (lactic acid) with different flexible copolymers” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012069. (scopus)
  17. Cherykhunthod, W., Seadan, M., and Suttiruengwong, S. (2015). “Effect of peroxide and chain extender on mechanical properties and morphology of poly(butylenes succinate)/poly(lactic acid) blends” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012073. (scopus)
  18. Pitivut, S., Suttiruengwong, S., and Seadan, M. (2015). “Effect of reactive agent and transesterification catalyst on properties of PLA/PBAT blends” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012090. (scopus)
  19. Bureepukdee, C., Suttiruengwong, S., and Seadan, M. (2015). “A study on reactive blending of (poly lactic acid) and poly(butylenes succinate co adipate)” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012070. (scopus)
  20. Hongdilokkul, P., Keeratipinit., K., Chawthai, S., Hararak, B., Seadan, M., and Suttiruengwong, S. (2015). “A Study on properties of PLA/PBAT from blown film process” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012112. (scopus)
  21. Hemsri, S., Thongpin, C., Somkid, P., Sae-arma, S., and Paiykaew, A. (2015). “Improvement of toughness and water resistance of bioplastic based on wheat gluten using epoxidized natural rubber” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012049. (scopus)
  22. Thongpin, C., Srimuk, J., hipkam, N., and Wachirapong, P. (2015). “Effect of natural fiber types and sodium silicate coated on natural fiber mat/PLA composites: Tensile properties and rate of fire propagation” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012078. (scopus)
  23. Khankrua, R., Pivsa-Art, S., Hiroyuki, H., and Suttiruengwong, S. (2015). “Grafting of poly (lactic acid) with maleic anhydride using supercritical carbon dioxide” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012066. (scopus)
  24. Yanwong, S., and Threepopnatkul, P. (2015). “Effect of peppermint and citronella essential oils on properties of fish skin gelatin edible films” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012064. (scopus)
  25. Nanthananon, P., Seadan, M., Pivsa-Art, S., and Suttiruengwong, S. (2015). “Enhanced crystallization of poly (lactic acid) through reactive aliphatic bisamide” IOP Conf. Series: Materials Science and Engineering 87 (2015) 012067. (scopus)
  26. Hongsriphan, N., Muangrak, W., Soonthornvacharin, K., and Tulaphol, T. (2015). “Mechanical Improvement of Poly(butylene succinate) with Polyamide Short Fibers” Macromolecular Symposia 354(1), (AUG 2015): 28-34. (scopus)
  27. Hemsri, S., Thongpin, C., Moradokpermpoon, N., Niramon, P., and Suppaso, M. (2015). “Mechanical Properties and Thermal Stability of Poly(butylenes succinate)/Acrylonitrile Butadiene Rubber Blend” Macromolecular Symposia 354(1), (AUG 2015): 145-154. (scopus)
  28. Sooksaen, P., Pengsuwan, N., Karawatthanaworrakul, S., and Pianpraditkul, S. (2015). “Formation of Porous Apatite Layer during In Vitro Study of Hydroxyapatite-AW Based Glass Composites” Advances in Condensed Matter Physics 2015, Article ID:158582, 9 pages.  (scopus)
  29. Yongvanich, N. (2015). “Isolation of Nanocellulose from Pomelo Fruit Fibers by Chemical Treatments” Journal of Natural Fibers 12(4), (JUL 2015): 323-331. (scopus)
  30. Pivsa-Art, S., and Suttiruengwong, S. (2015). “Development of Biobased and Biodegradable Polymers for Packaging in Thailand” Journal of Packaging Scinece & Technology 24(5), 247-255.
  31. Loryuenyong, V., Saewong, C., Aranchaiya, C., and Buasri, A. (2015). “The Improvement in Mechanical and Barrier Properties of Poly(Vinyl Alcohol)/Graphene Oxide Packaging Films” Packaging Technology and Science 28: 939-947. (scopus)
  32. Taweesup, K., Lertsakwanit, R., Jiravanichkul, J., Yongvanich, N., Lothongkum, G., and Visuttipitukul, P. (2015). “Effect of Type and Coating Time of Interlayer on Properties and Morphology of Cr-Zr-N Film Prepared by DC Magnetron Sputtering PVD on H13 Steel” Key Engineering Materials 658: 111-119. (scopus)
  33. Buasri, A., Rochanakit, K., Wongvitvichot, W., Masa-ard, U., and Loryuenyong, V. (2015). “The Application of Calcium Oxide and Magnesium Oxide from Natural Dolomitic Rock for Biodiesel Synthesis” Energy Procedia 79: 562 – 566. (ScienceDirect)
  34. Buasri, A., and Loryuenyong, V. (2015). “The new green catalysts derived from waste razor and surf clam shells for biodiesel production in a continuous reactor” Green Processing and Synthesis 4(5), (OCT 2015): 389-397. (scopus)

2014

  1. Wattananawinrat, K., Threepopnatkul, P., and Kulsetthanchalee, C. (2014) “Morphological and Thermal Properties of LDPE/EVA Blended Films and Development of Antimicrobial Activity in Food Packaging Film” Energy Procedia 56: 1-9.
  2. Threepopnatkul, P., Wongnarat, C., Intolo, W., Suato, S., and Kulsetthanchalee, C. (2014). “Effect of TiO2 and ZnO on Thin Film Properties of PET/PBS Blend for Food Packaging Applications”, Energy Procedia 56: 102-111.
  3. Nekhamanurak, B., Patanathabutr, P., and Hongsriphan, N. (2014). “The influence of micro-/nano-CaCO3 on thermal stability and melt rheology behavior of poly(lactic acid)” Energy Procedia 56: 118-128.
  4. Direksilp, C., and Threepopnatkul, P. (2014). “Performance Improvement of PS from Expanded Polystyrene Off-grade” Energy Procedia 56: 135-141.
  5. Kampangkaew, S., Thongpin, C., and Santawtee, O. (2014). “The synthesis of Cellulose nanofibers from Sesbania Javanica for filler in Thermoplastic starch” Energy Procedia 56: 318-325.
  6. Phuangngamphan, P., and Thongpin, C. (2014). “Synthesize of Polydiacetylene containing Copolyurethane using Polyol product derived from Chemical recycling of PET bottles” Energy Procedia 56: 326-333.
  7. Suttiruengwong, S., Pitak, S., SaeDan, M., Wongpornchai, W., and Singho, D. (2014). “Binary-additives Toughened Biopolymer for Packaging Application” Energy Procedia 56: 431-438.
  8. Singsang, W., Panapoy, M., and Ksapabutr, B. (2014). “Facile one-pot synthesis of freestanding carbon nanotubes of cellulose-derived carbon films for supercapacitor applications: effect of the synthesis temperature” Energy Procedia 56: 439-447.
  9. Chavalitkul, J., Likittanaprasong, N., Seansala, P., Suttiruengwong, S., and Seadan, M. (2014). “Application of Ultrasonic Atomization for Biopolymer Particles and Tube Fabrication” Energy Procedia 56: 458-465.
  10. Lorkit, P., Panapoy, M., and Ksapabutr, B. (2014). “Iron oxide-based supercapacitor from ferratrane precursor via sol-gel-hydrothermal process” Energy Procedia 56: 466-473.
  11. Boonniteewanich, J., Pitivut, S., Tongjoy, S., Lapnonkawow, S., and Suttiruengwong, S. (2014). “Evaluation of Carbon Footprint of Bioplastic Straw compared to Petroleum based Straw Products” Energy Procedia 56: 518-524.
  12. Suttiruengwong, S., Sotho, K., and Seadan, M. (2014). “Effect of Glycerol and Reactive Compatibilizers on Poly(butylene succinate)/Starch Blends” Journal of Renewable Materials 2(4): 85-92.
  13. Sooksaen, P., Utama, N., Pratooyai, J., Chinsatit, P., and Chuankrerkkul, N. (2014). “Microstructure and Dielectric Properties of Alumina Addition on TiO2-doped Barium Titanate Ceramics” FERROELECTRICS 458(1): 118-121.
  14. Sooksaen, P., Rapp, M., and Potharin, K. (2014). “Microwave assisted method on the morphology of aluminium doped ZnO nanocrystals” Key Engineering Materials 608: 153-158.
  15. Sooksaen, P., Rapp, M., Sirinakorn, T., Meepanya, P., and Leangthammarat, P. (2014). “Morphology controlled flower-like ZnO particles synthesized by low cost high pressure cooker” Key Engineering Materials 608: 159-163.
  16. Chomsirigul, N., Khuanthong, O., Sooksaen, P., and Chuankrerkkul, N. (2014). “Influence of Specimen Dimensions and Temperature on the Debinding Behavior of Alumina Feedstock” Key Engineering Materials 608: 170-174.
  17. Loryuenyong, V., Jarunsak, N., Chuangchai, T., and Buasri, A. (2014). “The Photocatalytic Reduction of Hexavalent Chromium by Controllable Mesoporous Anatase TiO2 Nanoparticles” Advances in Materials Science and Engineering 2014, Article ID 348427: 1-8.
  18. Buasri, A., Worawanitchaphong, P. Trongyong, S., and Loryuenyong, V. (2014). “Utilization of Scallop Waste Shell for Biodiesel Production from Palm Oil-Optimization Using Taguchi Method” APCBEE Procedia 8: 216-221.
  19. Khankrua, R., Pivsa-Art, S., Hiroyuki, H., and Suttiruengwong, S. (2014). “Effect of chain extenders on thermal and mechanical properties of poly(lactic acid) at high processing temperatures: Potential application in PLA/Polyamide 6 blend” Polymer Degradation and Stability 108: 232-240.
  20. Yongvanich, N., and Maensiri, S. (2014). “Synthesis of Cobalt-Doped SnO2 Nanoparticles by Chemical Precipitation with Chelation” Integrated Ferroelectrics 156(1): 53-57.
  21. Sirijan, T., Thummanukitcharoen, K., Kerdsiri, J., Gaeonaun, P., and Yongvanich, N. (2014). “Crystallization of Willemite Phase in Ceramic Glaze” Integrated Ferroelectrics 156(1): 67-71.
  22. Loryuenyong, V., Ngoyjansri, T., Yantreesingha, P., Leelawannakhet, S., and Buasri, A. (2014). “Hydrothermal synthesis of 11 Å tobermorite from chicken eggshells, rice husks, and soda-lime-silica glasses for wastewater treatment application” Journals of Optoelectronics and Advanced Materials 16(5-6): 600-605.
  23. Buasri, A., Chaiyut, N., Loryuenyong, V., Machuen, P., Chalitapanukul, P., and Jirarattanawanna, S. (2014). “Effect of silkworm silk fibre content and length on mechanical and thermal properties of green composites based on poly(butylene succinate)” Journals of Optoelectronics and Advanced Materials 16(7-8): 939-944.
  24. Buasri, A., Buranasing, G., Piemjaiswang, R., Yousatit, S., and Loryuenyong, V. (2014). “Effect of Titanium Dioxide Nanoparticles on Mechanical and Thermal Properties of Poly(Lactic Acid) and Poly(Butylene Succinate) Blends” Advances in Science and Technology 96: 33-38.
  25. Threepopnatkul, P., Krachang, T., and Kulsetthanchalee, C. (2014). “Phosphate Derivative Flame Retardants on Properties of Pineapple Leaf Fiber/ABS Composites” Polymers & Polymer Composites 22(7):591-597.
  26. Bootchanont, A., Triamnak, N., Rujirawat, S., Yimnirun, R., P. Cann, D., Guo, R., and Bhalla, A. (2014). “Local structure and evolution of relaxor behavior in BaTio3-Bi(Zn5Ti0.5)O3 ceramics” Ceramics International 40(9): 14555-14562.
  27. Yongvanich, N., Premanan, C., Khongkamchat, W., and Noonoi, S. (2014). “Value-addition of ZnO used in glazing industry for varistor application” Materials Research Innovations 18(S6): 169-173.
  28. Sirijan, T., and Yongvanich, N. (2014). “Nanostructure of Cr-doped ZnO thin films by dip coating” Materials Research Innovations 18(S6), (December 8, 2014): 174-178.
  29. Panyasart, K., Chaiyut, N., Amornsakchai, T., and Santawitee, O. (2014). “Effect of surface treatment on the properties of pineapple leaf fibers reinforced polyamide 6 composites” Energy Procedia 56: 406-413.
  30. Prasatkhetragarn, A., Triamnak, N., Yimnirun, R., and Cann, DP. (2014). “Morphotropic Phase Boundary of 0.875Pb(ZrxTi1-x)O-3-0.125Pb (Mg1/3Nb2/3)O-3 Ceramics” FERROELECTRICS 470(1) special Iss.SI., (October): 280-286.

2013

  1. Homklin, R., and Hongsriphan, N. (2013). “Mechanical and Thermal Properties of PLA/PBS Co-continuous Blends Adding Nucleating Agent” Energy Procedia 34: 871-879.
  2. Ekabutr, P., Lerdwijitjarud, W., and Sittattrakul, A. (2013). “Glycerol and Esterified Products of Palmitic Acid as a Mixed Plasticizer for Thermoplastic Tapioca Starch” Polymer Engineering and Science: 134-145.
  3. Buasri, A., Loakhonka, P., Benjapolchai, T., Chusripet, N., and Loryuenyong, V. (2013). “Surface Modification and Characterization of Photodegradable Polystyrene-TiO2 Nanocomposites” Applied Mechanics and Materials 372: 128-131.
  4. Sooksaen, P., Yongvanich, N., Penglao, W., Jeentong, R., and Worapakapakorn, B. (2013). “High Content of Niobium on the Properties of Barium Titanate Ceramics” FERROELECTRICS 452(1): 22-26.
  5. Visuttipitukul, P., Sooksaen, P., and Yongvanich, N. (2013). “Sol-Gel Synthesis of SrTiO3 Nanoparticles Using Acetic Acid as a Chelating Agent” FERROELECTRICS 457(1): 82-88.
  6. Buasri, A., Chaiyut, N., Loryuenyong, V., Phakdeepatarapha, E., Watpathomsub, S., and Kunakemakorn, V. (2013). “Utilization of Biodiesel Wastes as a Bioresource for the Preparation of Activated Carbon” INTERNATIONAL JOURNAL OF APPLIED PHYSICS AND MATHEMATICS 3(3): 173-177.
  7. Supattarasakda, K., Petcharoen, K., Permpool, T., Sirivat, A., and Lerdwijitjarud, W. (2013). “Control of Hematite Nanoparticle Size and Shape by the Chemical Precipitation Method” POWDER TECHNOLOGY 249: 353-359.
  8. Ksapabutr, B., Chalermkiti, T., Wongkasemjit, S., and Panapoy, M. (2013). “Controllable Doposition of Gadolinlum Doped Ceria Electrolyte Films by Magnetic-Field-Assisted Electrostatic Spray Deposition” THIN SOLID FILMS 546: 423-430.
  9. Loryuenyong, V., Boonsiri, K., Ketkeaw, V., Phuangkeaw, U., and Buasri, A. (2013). “Sol-Gel Derived Mesoporous Silica Nanoparticles under Base Catalysis for Uses as Anti-Reflective Coating Layers” Advanced Materials Research 650: 108-112.
  10. Buasri, A., Chaiyut, N. Loryuenyong, V., Jaritkaun, N., Yavilas, T., and Yoorengdech, N. (2013). “Mechanical and Thermal Properties of Silk Fiber Reinforced Poly(Lactic Acid) Biocomposites” OPTOELECTRONICS AND ADVANCED MATERIALS: RAPID COMMUNICATIONS 7(11-12): 938-942.
  11. Buasri, A., Chaiyut, N., Loryuenyong, V., Wongweang, C., and Khamsrisuk, S. (2013). “Application of Eggshell Wastes as a Heterogeneous Catalyst for Biodiesel Production” SUSTAINABLE ENERGY 1(2): 7-13.
  12. Buasri, A., Chaiyut, N., Loryuenyong, V., Worawanitchaphong, P., and Trongyong, S. (2013). “Calcium Oxide Derived from Waste Shells of Mussel, Cockle, and Scallop as the Heterogeneous Catalyst for Biodiesel Production” THE SCIENTIFIC WORLD JOURNAL 2013, Article ID 460923.
  13. Phattarateera, S., Threepopnatkul, P., and Kulsetthanchalee, C. (2013). “Comparative Performance of Coupling Agent and Compatibilizer on Polystyrene/Zeolite Composites” CHIANG MAI JOURNAL OF SCIENCE 40(6): 1035-1045.
  14. Chalermkiti, T., Panapoy, M., Chaiyut, N., and Ksapabutr, B. (2013). “Fabrication of Samarium Doped Ceria Electrolyte on Rough Glass Substrate with High Electrocal Conductivity by Electrostatic Spray Deposition for Intermediate Temperature Solid Oxide Fuel Cells” ENERGY PROCEDIA 34: 471-478.
  15. Buasri, A., Pholprasert, C., Suwunnakee, N., Phuchainan, T., and Loryuenyong, V. (2013). “Effects of Carbonization Temperature and Nanoporous Silica Templating on the Synthesis of Porous Carbon from Commercial Sugar” Advanced Materials Research 650: 113-118.
  16. Pongtanayut, K., Thongpin, C., and Santawitee, O. (2013). “The Effect of Rubber on Morphology, Thermal Properties and Mechanical Properties of PLA/NR and PLA/ENR Blends” ENERGY PROCEDIA 34: 888-897.
  17. Khankrua, R., Pivsa-Art, S., Hiroyuki, H., and Suttiruengwong, S. (2013). “Thermal and Mechanical Properties of Biodegradable Polyester/Silica Nanocomposites” ENERGY PROCEDIA 34: 705-713.
  18. Panapoy, M., Chalermkiti, T., and Ksapabutr, B. (2013). “Low-temperature and facile fabrication method of dense Gd1Ce0.9O1.95 electrolyte thin films by electrostatic spray deposition : Effects of solvent ratio and deposition temperature” Advanced Science Letters 19(2): 651-655(5).
  19. Loryuenyong, V., Buasri, A., Pochana, J., Hosawangwong, S., Thaisaung, S., and Sooksaen, P. (2013). “Synthesis of Anatase TiO2 Nanoparticles by Template Sol-Gel Method and its Application in Photocatalytic Degradation of Organic Pollutants” Advanced Science Letters 19(10): 2919-2922.
  20. Sooksaen, P., Prasertcharoensuk, P., Damnernsawat, J., and Pattamawitayanimit, N. (2013). “High Indentation Resistance of Aluminum Borate based Glass-Ceramics” Key Engineering Materials 545: 3-7.
  21. Chuankrerkkul, N., Sooksaen, P., Pakunthod, P., Kosalwit, T., and Pinthong, W. (2013). “Powder Injection Moulding of Alumina Using PEG/PVB Binder Systems” Key Engineering Materials 545: 173-176.
  22. Buasri, A., Chaiyut, N., Loryuenyong, V., Pin-Ngern, K., Tonprasert, N., and Dangnuan, S. (2013). “Production of Fatty Acid Methyl Ester by Esterification of Waste Frying Oil with Methanol Using Acidified Silica as Heterogeneous Catalyst” Journal of Biobased Materials and Bioenergy 7(2), (April 2013): 229-232.
  23. Buasri, A., Chaiyut, N., Loryuenyong, V., Prukpraopong, S., Jitlaykha, S., and Nualyai, S. (2013). “Photodegradation and Thermal Properties of Bionanocomposite Films Based on Polylactide and Functionalized Titanium Dioxide” Advanced Science Letters 19(11): 3272-3274.
  24. Prukwarun, W., Khumchoo, W., Seancotr, W., and Phupaichitkun, S. (2013). “CFD simulation of fixed bed dryer by using porous media concepts: Unpeeled longan case” International Journal of Agricultural and Biological Engineering 6(1), (March 2013): 100-110.
  25. Buasri, A., Chaiyut, N., Loryuenyong, V., Worachat, M., Kanchanapradit, R., and Baibou, S. (2013). “Effect of TiO2 Nanoparticles on Tensile and Photodegradation Behavior of Biopolymer Films Based on Poly(Butylene Succinate)” Applied Mechanics and Materials 376: 89-92.
  26. Loryuenyong, V., Totepvimarn, K., Eimburanapravat, P., Boonchompoo, W., and Buasri, A. (2013). “Preparation and Characterization of Reduced Graphene Oxide Sheet via Water-Based Exfoliation and Reduction Methods” Advanced in Materials Science and Engineering 2013, Article ID 923403.
  27. Threepopnatkul, P., Krachang, T., Teerawattananon, W., Suriyaphaparkorn, K., and Kulsetthanchalee., C. (2013). “Effect of Flame Retardants on Rerformance of PALF/ABS Composites” Advanced Materials Research 747: 351-354.
  28. Yongvanich, N., and Visuttipitukul, P. (2013). “Isolation of Nanocellulose from Pomelo Fruit Fibers by Chemical Treatments” Advanced Materials Research 747: 363-366.
  29. Chockcharoenchai, B., Kraitape, N., Kattiyaboot, T., Rodsantia, R., and Thongpin, C., Chockcharoenchai, B., Kraitape, N. and Kattiyaboot, T. (2013). “Cure Characteristic, Morphology and Mechanical Properties of partially cured NBR blended with NR” Advanced Materials Research 747: 463-466.
  30. Ksapabutr, B., Chalermkiti, T., and Panapoy, M. (2013). “Facile and Low-Cost Synthesis of Ni/NiO Catalyst by Microwave Plasma Method for Carbon Nanotubes Growth Using Plastic Waste as Carbon Source” Advanced Science Letters 19(1): 268-272(5).
  31. Hongsriphan, N., Burirat, T., Niratsungnern, P., and Trongteng, S. (2013). “Influence of Calcium Carbonate Nanoparticles on Mechanical Behavior of Poly(lactic acid)/Poly(butylene succinate) Blend” Journal of Metals, Materials and Minerals 23(1): 41-47.
  32. Thongpin, C., Klatsuwan, S., Borkchaiyapoom, P., and Thongkamwong, S. (2013). “Crystallization Behavior of PLA/NR Compared with Dynamic Vulcanized PLA/NR” Journal of Metals, Materials and Minerals 23(1): 53-59.
  33. Yongvanich, N. (2013). “Synthesis of Strontium-Doped ZnO-Based Nanopowders by Chemical Co-precipitation” Chiang Mai J. Sci. 40(6): 1046-1054.

2012

  1. Loryuenyong, V., Mangmethub, K., Nanan, S., and Apirattikorn, S. (2012). “Fired Porcelain using Wasted Glasses as a Fluxing Agent” International Journal of Engineering and Physical Sciences 6: 229-232.
  2. Buasri, A., Chaiyut, N., Tapang, K., Jaroensin, S., and Panphrom, S. (2012). “Biosorption of Heavy Metals from Aqueous Solutions Using Water Hyacinth as a Low Cost Biosorbent” Civil and Environmental Research 2(2): 17-24.
  3. Buasri, A., Chaiyut, N., Kritsanakun, C., Phatkun, C., and Khunsri, T. (2012). “Preparation and Properties of Nanocomposites Based on Poly(Lactic Acid) and Modified TiO2” Advanced Materials Research 463-464, (February): 519-522.
  4. Buasri, A., Chaiyut, N., Petsungwan, T., Boonyuen, Y., and Moonmanee, S. (2012). “Effect of Surface Treatment on Interfacial and Properties of Water Hyacinth Fiber Reinforced Poly(Lactic Acid) Composites” Advanced Materials Research 463-464, (February): 449-452.
  5. Loryuenyong, V., Sooksaen, P., and Sanitchai, P. (2012). “Synthesis of Anatase-Based Titania Nanostructures using Extreme Hydrothermal Conditions” Advanced Materials Research 463-464, (February): 1493-1496.
  6. Buasri, A., Chaiyut., N., Tapang, K., Jaroensin, S., and Panphrom, S. (2012). “Removal of Cu2+ from Aqueous Solution by Biosorption on Rice Straw – an Agricultural Waste Biomass” International Journal of Environmental Science and Development 3(1), (February): 10-14.
  7. Buasri, A., Chaiyut, N., Iamma, K., Kongcharoen, K., and Cheunsakulpong, K. (2012). “Preparation and Properties of Biopolymer from L-Lactide (LL) and ε-Caprolactone (CL)” International Journal of Chemical and Biological Engineering 6: 138-141.
  8. Arunyagasemsuke,V., Suttiruengwong, S., and Seadan, M. (2012). “Reactive blends of poly(butylene adipate-co-terephthalate) and thermoplastic starch” Advanced Materials Research 488-489, (March): 57-61.
  9. Rojsatean, J., S., and Seadan, M. (2012). “Properties of Compatibilized SAN/NR Blends” Advanced Materials Research 488-489, (March): 62-66.
  10. Sooksaen, P., Kannasute, S., Larbmark, K., and Maneelada, C. (2012). “Bulk crystallization of ceramic whiskers from borate-based glass” Advanced Materials Research 488-489, (March): 291-294.
  11. Wiriya-Amornchai, A., Hongsriphan, N., and Pattanatabutr, P. (2012). “Natural Dyeing of Wood Fibers for Green Biocomposites” Advanced Materials Research 488-489, (March): 511-514.
  12. Nekhamanurak, B., Patanathabutr, P., and Hongsriphan, N. (2012). “Surface Modified CaCO3 Nanoparticles with Silica Sol-Gel Process using in Poly(Lactic acid) Nanocomposite” Advanced Materials Research 488-489, (March): 520-524.
  13. Yongvanich, N., Visuttipitukkul, P., Assawasilpakul, W., Srichan, W., and Sungsuwan, N. (2012). “Fabrication of Sn-doped ZnO Varistor by Solid State Processing” Applied Mechanics and Materials 110-116: 1716-1720.
  14. Sooksaen, P. (2012). “Structure and Crystallization of Borate-Based Glasses for Machinable Material Applications” Applied Physics and Mathematics 2(2): (March): 89-92.
  15. Sooksaen, P., Chaithep, K., Saliwong, T., and Duangart, T. (2012). “Apatite-Wollastonite Bioactive Glass-Ceramic Scaffolds for Hard Tissue Engineering” Advanced Materials Research 506: 146-149.
  16. Buasri, A., Chaiyut, N., Loryuenyong, V., Rodklum, C., Chaikwan, T., and Kumphan, N. (2012). “Continuous Process for Biodiesel Production in Packed Bed Reactor from Waste Frying Oil Using Potassium Hydroxide Supported on Jatropha curcas Fruit Shell as Solid Catalyst” APPLIED SCIENCES 2(3): 641-653.
  17. Buasri, A., Chaiyut, N., Tapang, K., Jaroensin, S., and Panphrom, S. (2012). “Equilibrium and Kinetic Studies of Biosorption of Zn(II) Ions from Wastewater Using Modified Corn Cob” APCBEE PROCEDIA 3: 60-64.
  18. Buasri, A., Chaiyut, N., Borvornchettanuwat, K., Chantanachai, N., and Thonglor, K. (2012). “Thermal and Mechanical Properties of Modified CaCO3/ PP Nanocomposites” INTERNATIONAL JOURNAL OF CIVIL AND ENVIRONMENTAL ENGINEERING 6: 374-377.
  19. Loryuenyong, V., Angamnuaysiri, K., Sukcharoenpong, J., and Suwannasri, A. (2012). “Sol-Gel Derived Mesoporous Titania Nanoparticles: Effects of Calcination Temperature and Alcoholic Solvent on the Photocatalytic Behavior” CERAMICS INTERNATIONAL 38(3): 2233-2237.
  20. Nekhamanurak, B., Patanathabutr, P., and Hongsriphan, N. (2012). “Thermal-Mechanical Property and Fracture Behaviour of Plasticised PLA-CaCO3 Nanocomposite” PLASTICS RUBBER AND COMPOSITES 41(4-5): 175-179.
  21. Loryuenyong, V., Angamnuaysiri, K., Sukcharoenpong, J., and Suwannasri, A. (2012). “Sol-Gel Template Synthesis and Photocatalytic Begaviour of Anatase Titania Nanoparticles” SCIENCEASIA 38(3): 301-306.
  22. Buasri, A., Chaiyut, N., Loryuenyong, V., Rodklum, C., Chaikwan, T., Kumphan, N., Jadee, K., Klinklom, P., and W.Wittayarounayut (2012). “Transesterification of Waste Frying Oil for Synthesizing Biodiesel by KOH Supported on Coconut Shell Activated Carbon in Packed Bed Reactor” SCIENCEASIA 38(3): 283-288.
  23. Intanoo, P., Sirivat, A., Kunanuruksapong, R., Lerdwijitjarud, W., and Kunchornsup, W. (2012). “Electroactive Polymer Actuator from Highly Doped Permethylpolyazine Dispersed in Ethylene Propylene Diene Elastomer” JOURNAL OF POLYMER RESEARCH 19(10), article no.9981: 1-10.
  24. Buasri, A., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2012). “Process Optimization for Ethyl Ester Production in Fixed Bed Reactor Using Calcium Oxide Impregnated Palm Shell Activated Carbon (CaO/PSAC)” INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT 1(3): 81-86.
  25. Phaechamud, T., Thongpin, C., and Choncheewa, C. (2012). “Shellac Wax-Lutrol F127 as Matrix Base for Hot Melt Extrusion” RESEARCH JOURNAL OF PHARMACEUTICAL, BIOLOGICAL AND CHEMICAL SCIENCE 3(4): 687-694.
  26. Buasri, A., Ksapabutr,B., Panapoy, M., and Chaiyut, N. (2012). “Biodiesel Production from Waste Cooking Palm Oil Using Calcium Oxide Supported on Activated Carbon as Catalyst in a Fixed Bed Reactor” KOREAN JOURNAL OF CHEMICAL ENGINEERING 29(12): 1708-1712.
  27. Buasri, A., Chaiyut, N., Loryuenyong, V., Yernpeng, K., Suksamran, P., and Boonnin, S. (2012). “Mechanical and Thermal Properties of Polylactide Biocomposite Reinforced with Surface Modified Coir Fiber” JOURNAL OF BIOBASED MATERIALS AND BIOENERGY 6(6): 617-621.
  28. Loryuenyong, V., Buasri, A., Srilachai, C., and Srimuang, H. (2012). “The Synthesis of Microporous and Mesoporous Titania with High Specific Surface Area Using Sol–Gel Method and Activated Carbon Templates” MATERIALS LETTERS 87: 47-50.
  29. Lopattananon, N., Thongpin, C., and Sombatsompop, N. (2012). “Bioplastics from Blends of Cassava and Rice Flours: The Effect of Blend Composition” INTERNATIONAL POLYMER PROCESSING 27(3): 334-340.
  30. Neamjan, N., Sricharussin, W., and Threepopnatkul, P. (2012). “Effect of Various Shapes of ZnO Nanoparticles on Cotton Fabric via Electrospinning for UV-Blocking” JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 12(1): 525-530.
  31. Wimonsong, W., Threepopnatkul, P. and Kulsetthanchalee, C. (2012). “Thermal Conductivity and Mechanical Properties of Wood Sawdust/ Polycarbonate Composites” MATERIALS SCIENCE FORUM 714: 139-146.

2011

  1. Buasri, A., Chaiyut, N., and Nakweang, C. (2011). “Preparing Activated Carbon from Palm Shell for Biodiesel Fuel Production” Chiang Mai Journal of Science, 38(4), (October): 572-578.
  2. Buasri, A., Chaiyut, N., Jenjaka, T., Weerasunthorn, S., and Juengrungchaiwattana, S. (2011). “Preparation and Characterization of PET-PLA Copolyester from Waste PET and Lactic Acid (LA)” Chiang Mai Journal of Science 38(4), (October): 619-624.
  3. Threepopnatkul, P., Teppinta, W., and Sombatsompop, N. (2011). “Effect of Co-monomer Ratio in ABS and Wood Content on Processing and Properties in Wood/ABS Composites” Fibers and Polymers 2011,  12(8), (December): 1007-1013.
  4. Sricharussin, W., Threepopnatkul, P., and Neamjan, N. (2011). “Effect of Various Shapes of Zinc Oxide Nanoparticles on Cotton Fabric for UV-blocking and Anti-bacterial Properties” Fibers and Polymers 2011, 12(8), (December): 1037-1041.
  5. Loryuenyong, V., Muanghom, T., Apinyanukul, T. and Rutthongjan, P. (2011). “Synthesis of templated mesoporous silica nanoparticles under base catalysis” Journal of Advances in Applied Ceramics 110(6), (May-June): 335-339.
  6. Sooksaen, P. (2011). “Effect of Alumina Content on the Properties of Ceramic Foams Crystallized with Nano-sized Mullite Crystals” Materials Science Forum 694, (July): 456-460.
  7. Sooksaen, P. (2011). “Apatite-leucite Micro/Nano Crystals from Aluminosilicate Glasses for Dental Applications” Materials Science Forum 694, (July): 435-439.

2010

  1. Thongpin, C., Juntum, J., Sa-Nguan-Moo, R., Suksa-Ard, A., and Sombatsompop, N. (2010). “Thermal Stability of PVC with g-APS-g-MMT and Zeolite Stabilizers by TGA Technique” Journal of Thermoplastic Composite Materials 23(4), (July): 435-445.
  2. Laonuad, P., Chaiyut, N., and Ksapabutr, B. (2010). “Poly(lactic acid) Preparation by Polycondensation Method” Journal of   Optoelectronics and Advanced Materials-Rapid Communications,  4(8), (August): 1200-1202.
  3. Boua-In, K., Chaiyut, N., and Ksapabutr, B. (2010). “Preparation of Polylactide by Ring-Opening Polymerisation of  Lactide”  Journal of   Optoelectronics and Advanced Materials-Rapid Communications 4(9), (September): 1404-1407.
  4. Ksapabutr, B., Chalermkiti, T., Wongkasemjit, S., and Panapoy, M.  (2010). “Fabrication of Scandium Stabilized Zirconia Thin Film by Electrostatic Spray Deposition Technique for Solid Oxide Fuel Cell Electrolyte”  Journal of Thin Solid Films 518(22), (September): 6518-6521.
  5. Ksapabutr, B., Poungchun, G. and Panapoy, M. (2010). “Architectural control of nanostructured ZrO2 thin films via the electrostatic spray deposition technique using zirconatrane as a precursor” PHYSICA SCRIPTA  T139, Article Number: 014055,  Published: MAY 2010.
  6. Sooksaen, P., Boonmee, J., Witpathomwong, C. and Likhitlert, S. (2010). “Effect of K2O/SiO2 Ratio on the Crystallization of Leucite in Silicate-Based Glasses” Journal of Metals, Materials and Minerals 20(1): 11-19.
  7. Panapoy, M., Singsang, W. and Ksapabutr, B. (2010). “Electrically conductive poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate)/polyacrylonitrile fabrics for humidity sensors” PHYSICA SCRIPTA T139, Article Number: 014056, Published: MAY 2010.

2009

  1. Threepopnatkul, P., Kaerkitcha, N., and Athipongarporn, N. (2009). “Effect of surface treatment on performance of pineapple leaf fiber-polycarbonate composites” Composites Past B:engineering 40B(7): 628-632.
  2. Loryuenyong, V., Panyachai, T., Kaewsimork, K., Siritai, C. (2009). “Effects of recycled glass substitution on the physical and mechanical properties of clay bricks” Waste Management 29(10): 2717-2721.
  3. Visuttipitukul, P., Limvanutpong, N., Yongvanich, N., Srichroenchai, P., and Wangyao, P. (2009). “Aluminization of High Purity Nickel by Powder Liquid Coating” Chiang Mai Journal of Science 36(3): 331-339.
  4. Sricharussin, W., Sopajaree, C., Maneerung, T., and Sangsuriya, N. (2009). “Modification of cotton fabrics with β-cyclodextrin derivative for aroma finishing” The Journal of The Textile Institute 100(8): 682-687.
  5. Ksapabutr, B., Thong-Oun, W., and Panapoy, M. (2009). “Morphology of nanostructured tio2 thin film: synthesis by electrostatic spray deposition technique and its photocatalytic activity” Functional Materials Letters 2(4): 179-183.
  6. Panapoy, M., Duangdee, C., Laobuthee, A., and  Ksapabutr, B. (2009). “Synthesis of A novel aminoalkoxide of iron by oxide one-pot process:Its sol-gel application to iron oxide powder” Songklanakarin Journal of Science and Technology  31 (5), (Sep. – Oct. 2009): 541-545.
  7. Sricharussin W.,  Ree-Iam, P.  Phanomchoeng, W., and Poolperm, S. (2009). “Effect of enzymatic treatment on the dyeing of pineapple leaf fibres with natural dyes” Scienceasia 35(1): 31-36.

2008

  1. Loryuenyong, V., Ruankul, N., Supso, N., and Chunpadungsuk, P. (2008). “Effects of Excessive Reactants on the Properties of Cadmium Sulfide thin Films Prepared by Chemical Bath Deposition” Journal of Nanoscience 7(4 & 5): 279-282.
  2. Hachawee, K., Lerdwijitjarud, W., Sittattrakul, A., and Sirivat A. (2008). “Structural effect of ferrocenecarboxymethylated polymers on their electrical behavior under the exposure to methanol and acetone vapors”  Materials Science and Engineering B 153 :10-20.
  3. Ksapabutr, B., Panapoy, M., Choncharoen, K., Wongkasemjit, S, and Traversa, E. (2008). “Investigation of Nozzle Shape Effect on Samarium Doped Ceria Thin Film Prepared by Electrostatic Spray Deposition” Thin Solid Films 516: 5618-5324.

Update : 8 SEP 2022