Asst. Prof. Dr. Bussarin Ksapabutr

อ.บุศรินทร์

ผู้ช่วยศาสตราจารย์ ดร.บุศรินทร์ เฆษะปะบุตร

  • Ph.D. (Polymer Science) The Petroleum and Petrochemical College Chulalongkorn University, Thailand (2003)
  • วท.บ. (เทคโนโลยีวัสดุ) เกียรตินิยมอันดับ 2 มหาวิทยาลัยศิลปากร (2539)

สาขาที่เชี่ยวชาญ 

  • วัสดุและอุปกรณ์สำหรับเซลล์เชื้อเพลิง แหล่งกักเก็บพลังงาน ตัวรับรู้ และตัวเร่งปฏิกิริยา  (Materials and devices for fuel cells, energy storages, sensors, and catalysts)
  • กระบวนการและการประยุกต์ใช้งานของเส้นใยพอลิเมอร์และเซรามิกส์ และฟิล์มบาง
    (Processes and applications of polymeric/ceramic fibers and thin films)
  • เทคโนโลยีไฟฟ้าสถิต (Electrostatic technology)
  • การสังเคราะห์และการประยุกต์ใช้ของสารประกอบ Metallo-organic compound และวิทยาการและเทคโนโลยีโครงสร้างระดับนาโน
    (Synthesis and applications of metallo-organic compounds and nanostructure science and technology)
  • วัสดุคาร์บอนและวัสดุไฮบริดอัจฉริยะ (Carbon-based materials and smart hybrid materials)

E-mail, เบอร์ติดต่อ
     Ksapabutr _B@su.ac.th, kbussarin@yahoo.com, 034-241 708

ผลงานทางวิชาการ
วารสารวิชาการ

  1. Teerasuchai, K., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2021). “Preparation and properties of poly(Butylene succinate) porous scaffold by fused deposition modeling and salt leaching techniques” Journal of Current Science and Technology2021, 11(2) : 334-341.
  2. Dankeaw, A., Gualandris, F., Silva, R.H., Scipioni, R., Hansen, K.K., Ksapabutr, B., Esposito, V., and Marani, D. (2019). “Highly porous Ce-W-TiO 2free-standing electrospun catalytic membranes for efficient de-NO x via ammonia selective catalytic reduction” Environmental Science: Nano 6(1), (2019) : 94-104.
  3. Dankeaw, A., Gualandris, F., Silva, RH., Norrman, K., Gudik-Sorensen, M., Hansen, KK., Ksapabutr, B., Esposito, V., and Marani, D. (2018). “Amorphous saturated cerium-tungsten-titanium oxide nanofiber catalysts for NOx selective catalytic reaction” NEW JOURNAL OF CHEMISTRY 42(12), (JUN 21 2018): 9501-9509. DOI: 10.1039/c8nj00752g
  4. Lorkit, P., Phatharapeetranun, N., Ksapabutr, B., Wongkasemjit, S., Chaiyut, N., and Panapoy, M. (2018). “Double-layered TiO2/activated carbon films with enhanced photocatalytic activity towards methylene blue degradation” OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS 12(5-6), (MAY-JUN 2018) : 347-352.
  5. Gadea, C., Phatharapeetranun, N., Ksapabutr, B., Grivel, JC., and Esposito, V. (2018). “Stoichiometric control in Bi4Ti3O12 synthesis by novel hybrid solid state reaction” MATERIALS LETTERS 221, (JUN 15 2018) : 101-103. DOI: 10.1016/j.matlet.2018.03.130
  6. Dankeaw, A., Poungchan, G., Panapoy, M., and Ksapabutr, B. (2017). “In-situ one-step method for fabricating three-dimensional grass-like carbon-doped ZrO2 films for room temperature alcohol and acetone sensors” Sensors and Actuators B: Chemical, 242, (April) : 202-214. DOI: 10.1016/j.snb.2016.11.055
  7. Phatharapeetranun, N., Ksapabutr, B., Marani, D., Bowen, R., and  Esposito, V. (2017). “3D-printed barium titanate/poly-(vinylidene fluoride) nano-hybrids with anisotropic dielectric properties” Journal of Materials Chemistry C, 5 : 12430-12440.
  8. Sangkharat, N., Chaiyut, N., Ksapabutr, B., and Panapoy, M. (2016). “Single-step synthesis process of interconnected spiderweb-like TiO2 films as photoanode for self-powered ultraviolet-detector” Ceramics International,42: 5858–5864.
  9. Sangkharat, N., Chalermkiti, T., Lorkit, P., Ksapabutr, B., and Panapoy, M. (2016). “Hierarchical nanostructured porous titania films supported on glass substrate with enhanced photocatalytic efficiency” Optoelectronics and Advanced Materials-Rapid Communications, 10 (3-4): 217–221.
  10. Sittirug, I., Ksapabutr, B., and Panapoy, M. (2016). “Freestanding hematite nanofiber membrane for visible-light-responsive photocatalyst” Ceramics International, 42: 3864-3875.
  11. Poungchan, G., Ksapabutr, B., and Panapoy, M. (2016). One-step synthesis of flower-like carbon-doped ZrO2 for visible-light-responsive photocatalyst” Materials and Design, 89: 137-148.
  12. Ksapabutr, B., Nimnuan, P., and Panapoy, M. (2015). “Dense and uniform NiO thin films fabricated by one-step electrostatic spray deposition” Materials Letters, 153: 24-28.
  13. Singsang, W., Panapoy, M., and Ksapabutr, B. (2014). “Facile one-pot synthesis of freestanding carbon nanotubes of cellulose-derived carbon films for supercapacitor applications: effect of the synthesis temperature” Energy Procedia, 56: 439-447.
  14. Lorkit, P., Panapoy, M., and Ksapabutr, B. (2014). “Iron oxide-based supercapacitor from ferratrane precursor via sol-gel-hydrothermal process” Energy Procedia, 56: 466-473.
  15. Ksapabutr, B., Chalermkiti, T., Wongkasemjit, S., and Panapoy, M. (2013). “Controllable Doposition of Gadolinlum Doped Ceria Electrolyte Films by Magnetic-Field-Assisted Electrostatic Spray Deposition” Thin Solid Films, 546: 423-430.
  16. Chalermkiti, T., Panapoy, M., Chaiyut, N., and Ksapabutr, B. (2013). “Fabrication of Samarium Doped Ceria Electrolyte on Rough Glass Substrate with High Electrical Conductivity by Electrostatic Spray Deposition for Intermediate Temperature Solid Oxide Fuel Cells” Energy Procedia, 34: 471-478.
  17. Panapoy, M., Chalermkiti, T., and Ksapabutr, B. (2013). “Low-temperature and facile fabrication method of dense Gd1Ce0.9O1.95 electrolyte thin films by electrostatic spray deposition: Effects of solvent ratio and deposition temperature” Advanced Science Letters 19 (2): 651-655(5).
  18. Ksapabutr, B., Chalermkiti, T., and Panapoy, M. (2013). “Facile and Low-Cost Synthesis of Ni/NiO Catalyst by Microwave Plasma Method for Carbon Nanotubes Growth Using Plastic Waste as Carbon Source” Advanced Science Letters, 19 (1): 268-272(5).
  19. Buasri, A., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2012). “Process Optimization for Ethyl Ester Production in Fixed Bed Reactor Using Calcium Oxide Impregnated Palm Shell Activated Carbon (CaO/PSAC)” International Journal of Renewable Energy Development, 1 (3): 81-86.
  20. Buasri, A., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2012). “Biodiesel Production from Waste Cooking Palm Oil Using Calcium Oxide Supported on Activated Carbon as Catalyst in a Fixed Bed Reactor” Korean Journal of Chemical Engineering, 29 (12): 1708-1712.
  21. Ksapabutr, B., Chalermkiti, T., Wongkasemjit, S., and Panapoy, M., (2010). “Fabrication of scandium stabilized zirconia thin film by electrostatic spray deposition technique for solid oxide fuel cell electrolyte” Thin Solid Films, 518 : 6518–6521.
  22. Ksapabutr, B., Poungchun, G., and Panapoy, M. (2010). “Architectural control of nanostructured ZrO2 thin films via electrostatic spray deposition technique using zirconatrane as precursor” Physica Scripta, T139: 014055.
  23. Panapoy, M., Singsang, W., and Ksapabutr, B. (2010). “Electrically conductive poly(3,4–ethylenedioxythiophene)–poly(styrene sulfonate)/polyacrylonitrile fabrics for humidity sensors” Physica Scripta, T139: 014056.
  24. Laonuad, P., Chaiyut, N., and Ksapabutr, B. (2010). “Poly(lactic acid) preparation by polycondensation” Optoelectronics and Advanced Materials–Rapid Communications, 4, (8): 1200- 1202.
  25. Boua-In, K., Chaiyut, N., and Ksapabutr, B. (2010). “Preparation of polylactide by ring-opening polymerisation of lactide” Optoelectronics and Advanced Materials–Rapid Communications, 4, (9): 1404-1407.
  26. Ksapabutr, B, Thong–Oun, W., and Panapoy, M. (2009). “Morphology of nanostructured TiO2 thin film: synthesis by electrostatic spray deposition technique and its photocatalytic activity” Functional Materials Letters, 2, (4): 179–183.
  27. Panapoy, M., Duangdee, C., Laobuthee, A., and Ksapabutr, B. (2009). “Synthesis of a novel aminoalkoxide of iron by oxide one–pot process: Its sol–gel application to iron oxide powder” Songklanakarin Journal of Science and Technology, 31, (5) (2009): 541–545.
  28. Panapoy, M., Dankeaw, A., and Ksapabutr, B. (2008). “Electrical conductivity of PAN–based carbon nanofibers prepared by electrospinning method” Thammasat International Journal of Science and Technology, 13: 11–17.
  29. Ksapabutr, B., Panapoy, M. Choncharoen, K., Wongkasemjit, S., and Traversa, E. (2008). “Investigation of nozzle shape effect on samarium doped ceria thin film prepared by electrostatic spray deposition” Thin Solid Films, 516: 5618–5624.
  30. Panapoy, M., Saengsil, N., and Ksapabutr, B. (2008). “Electrical conductivity of poly (3,4–ethylenedioxythiophene)–poly(styrenesulfonate) coatings on polyacrylonitrile nanofibers for sensor applications” Advanced Materials Research, 55–57: 257–260.
  31. Ksapabutr, B., Anukoolwittaya, P., and Panapoy, M. (2008). “Light scattering in poly(methyl methacrylate) hybrid sheet filled by titanium dioxide nanocrystals prepared by high electric field assisted spray pyrolysis process” Advanced Materials Research, 55–57: 497–500.
  32. Panapoy, M., Wannasut, P., and Ksapabutr, B. (2008). “Improvement of UV protection properties in poly(methyl methacrylate) sheet coated by titanium dioxide/poly(methyl methacrylate) hybrid film” Advanced Materials Research, 55–57: 501–504.
  33. Panapoy, M., and Ksapabutr, B. (2008). “Fabrication of zirconia nanofibers using zirconatrane synthesized by oxide one–pot process as precursor” Advanced Materials Research, 55–57: 605–608.
  34. Ksapabutr, B., Wongkasemjit, S., and Gulari, E. (2006). “Sol-gel Derived Porous Ceria Powders Using Cerium Glycolate Complex as Precursor” Materials Chemistry and Physics, 99, (2-3): 318-324.
  35. Laobuthee, A., Koonsaeng, N., Ksapabutr, B., Panapoy, M., and Veranitisagul, C. (2005). “Doped MgAl2O4 spinel screen print thick film as sensing material for humidity measurement” International Journal of Materials & Structural Reliability, 3, (2): 95–103.
  36. Ksapabutr, B., Chalermkiti, T., and Panapoy, M. (2005). “Effect of nozzle shapes on the formation of taylor cone and the oscillation of fibers during electrospinning process” Chiang Mai University Journal, 4, (1): 115–119.
  37. Ksapabutr, B., Waikru, C., and Panapoy, M. (2005). “Effect of target shapes on distribution of polyacrylonitrile nanofibers prepared by electrospinning process” Chiang Mai University Journal, 4, (1): 109–113.
  38. Laobuthee, A., Koonsaeng, N., and Ksapabutr, B. (2005). “Improvement of magnesium aluminate spinel prepared by one pot process for thick film humidity sensors” Eng J Kasetsart, 54–55: 48–63.
  39. Ksapabutr, B., Laobuthee, A., and Panapoy, M. (2005). “Application of polymeric fibers for cementitious materials” J Res Eng Tech, 2(2) (2005): 179–190.
  40. Ksapabutr, B., Laobuthee, A., and Panapoy, M. (2005). “Electronic paper”, Eng J Kasetsart, 53, (18): 151–161.
  41. Ksapabutr, B., Laobuthee, A., and Panapoy, M. (2005). “Developments of cement composite systems using polymeric fibers as reinforcing materials: poly(ethylene terephthalate) and nylon 6,6: Part I: Bending and impact properties” International Journal of Materials & Structural Reliability, 3, (1) (2005): 53–66.
  42. Ksapabutr, B., Wongkasemjit, S., and Gulari, E. (2005). “Rheology and Heat Treatment of Zirconia Based Gels Synthesized from Sodium Glycozirconate Precursor” Mater Sci Forum, 480-481: 549-556.
  43. Ksapabutr, B., Wongkasemjit, S., and Gulari, E. (2004). “Preparation of Zirconia Powders by Sol-gel Route of Sodium Glycozirconate Complex” Powder Technology, 148: 11-14.
  44. Ksapabutr, B., Wongkasemjit, S., and Gulari, E. (2004). “Sol-gel Transition Study and Pyrolysis of Alumina Based Gels Prepared from Alumatrane Precursor” Colloid Surface A., 233: 145-153.
  45. Ksapabutr, B., Wongkasemjit, S., and Gulari, E. (2004). “One-pot Synthesis and Characterization of Novel Sodium Tris(glycozirconate) and Cerium Glycolate Precursors and Their Pyrolysis” Materials Chemistry and Physics, 83: 34-42.
  46. Opornsawad, Y., Ksapabutr, B., Wongkasemjit, S., and Laine, R.M. (2001). “Formation and Structure of Tris(alumatranyloxy-i-propyl)amine Directly from Al(OH)3 and Triisopropanolamine, European Polymer Journal, 37: 1877-1885.
  47. Charoenpinijkarn, W., Suwankruhagsn, M., Ksapabutr, B., Wongkasemjit, S., and Jamieson, A.M. (2001). “Sol-gel Processing of Silatranes” European Polymer Journal, 37: 1441-1448.

Proceedings

  1. Wiriyamontree, N., Chaiyut, N., Panapoy, M., and Ksapabutr, B. (2022). “Effect of PLA-PBAT compatibility and CNT content on the properties of PLA/PBAT/CNT composites” The 28th PPC Symposium on Petroleum and Petrochemicals and Polymers and the 13th Research Symposium on Petrochemical and Materials Technology, Chulalongkorn University, (June 23): 203-209.
  2. Songsiri, C., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2021). “Removal of Anionic Dye from Aqueous Solutions By Activated Carbon Derived From Water Hyacinth” The 27th PPC Symposium on Petroleum and Petrochemicals and Polymers and the 12th Research Symposium on Petrochemical and Materials Technology, Chulalongkorn University, (July 1) : 219-224.
  3. Sasaengta, D., Panapoy, M., Chaiyut, N., and Ksapabutr, B. (2020). “Efficient removal of methylene blue by low-cost and biodegradable highly effective adsorbents based on biomass in the fixed bed column” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  4. Pusri, C., Ksapabutr, B., Chaiyut, N., and Panapoy, M. (2020). “Performance of lightweight cement board using coconut coir fiber and expanded polystyrene foam waste” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  5. Thepthong, C., Ksapabutr, B., Chaiyut, N.,and Panapoy, M. (2020).“Enhanced mechanical performance of cement board composite reinforced with coconut coir fiber and tire rubber waste” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  6. Klaychanpong, C., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2020). “Properties of TiO2 incorporated poly(lactic acid)/poly(butylene adipate-coterephthalate) active packaging films and their antimicrobial efficiency” The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020) 2020, Nongnooch Garden, Pattaya, Thailand, (December 1-4) : 194-203.
  7. Thaiprasong, P., Chaiyut, N., Ksapabutr, B., and Panapoy, M. (2020). “Fabrication and Properties of PBAT/Urea Sheets for Agricultural Applications” The 26th PPC Symposium on Petroleum, Petrochemicals, and Polymers and The 11th Research Symposium on Petrochemical and Materials Technology, The Petroleum and petrochemical college Chulalongkorn University, (July 23) : 585-589.
  8. Phiwchaaum, C., Ksapabutr, B., Chaiyut, N., and Panapoy, M. (2020). “Kinetic study for the co-pyrolysis of water hyacinth biomass with waste polystyrene” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-11.
  9. Insung, T., Chaiyut, N., Ksapabutr, B., and Panapoy, M. (2019). “Preparation and properties of silane-treated banana fiber/poly(lactic acid) biocomposites” IOP Conference Series: Materials Science and Engineering 544(1), 012011.
  10. Phatharapeetranun, N., Gadea, C., Ksapabutr, B., and Esposito, V. (2017). “Assembly Three Dimensional Bismuth Titanate (3D-BiT) by Extrusion-Based Fuse Deposition Modeling Technique” Proceedings of Acadimics World 77th International Conference, Bangkok, Thailand, (September 5-6) : 1-5.
  11. บุศรินทร์ เฆษะปะบุตร, มาณพ ปานะโปย และ อรรถพล เอี่ยมศิลา (2560). “การเตรียมและสมบัติการเรืองแสงของ Sr3Al2O6 ที่ได้จากการสังเคราะห์ด้วยเทคนิคโซล-เจลร่วมกับไมโครเวฟ” การประชุมวิชาการเสนอผลงานวิจัยระดับชาติและนานาชาติ ครั้งที่ 8, มหาวิทยาลัยราชภัฏสวนสุนันทา กรุงเทพมหานคร, (16 มีนาคม) : 1501-1512.
  12. Sittirug, I., Ksapabutr, B., and Panapoy, M. (2015). “Recent Progress in Synthesis of Carbon-Doped Titanate Nanoribbons via One-Step Solvothermal Method for Enhancing Visible Light Photocatalytic Activity” Pure and Applied Chemistry International Conference 2015 (PACCON 2015), Amari Watergate Hotel, Bangkok, Thailand, (January 21-23) : 753-756.
  13. Dankeaw, A., Panapoy, M., and Ksapabutr, B. (2015). “Freestanding Functionalized Electrospun Carbon Nanofibrous Mats Based Humidity Sensors” Pure and Applied Chemistry International Conference 2015 (PACCON 2015), Amari Watergate Hotel, Bangkok, Thailand, (January 21-23) : 855-858.
  14. Sittirug, I., Ksapabutr, B., and Panapoy, M. (2015). “Fabrication and photocatalytic activity of activated carbon/TiO2 double-layered films” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-): 214-218.
  15. Poungchan, G., Panapoy, M. and Ksapabutr, B. (2015). “Flower-like ZrO2 thin film by electrostatic spray deposition for alcohol sensor application” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June) : 238-241.
  16. Sangkharat, N., Chalermkiti, T., Ksapabutr, B., and Panapoy, M. (2015). “Fabrication of 3D nanostructured TiO2 thin films by electrostatic spray deposition and their photocatalytic activity” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand,(June 11-): 242-246.
  17. Nimnuan, P., Panapoy, M., and Ksapabutr, B., (2014). “Preparation and performance of nickel oxide thin film thermistor by electrostatic spray deposition technique” 36th International Symposium on Dry Process (DPS 2014), Annex Hall, PACIFICO YOKOHAMA, PACIFICO Convention Plaza, Yokohama, Japan, (November 27-28.): 73-74.
  18. บุศรินทร์ เฆษะปะบุตร  มาณพ ปานะโปย และ น้ำฝน ไล่สัตรูไกล (2557). “เทคโนโลยี นวตกรรมและการออกแบบสำหรับเสื้อผ้าและผลิตภัณฑ์เพื่อสร้างความอบอุ่น” การประชุมวิชาการและเสนอผลงานวิจัยและสร้างสรรค์ระดับชาติและนานาชาติ “ศิลปากรวิจัยและสร้างสรรค์ ครั้งที่ 7: บูรณาการศาสตร์และศิลป์”, วังท่าพระ, กรุงเทพฯ, (24-26 มีนาคม): A-17 – A-24.
  19. Singsang, W., Panapoy, M., and Ksapabutr, B. (2013). “Facile one-pot synthesis of freestanding carbon nanotubes on cellulose-derived carbon films for supercapacitor applications: effect of the synthesis temperature” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21.): 544-549.
  20. Lorkit, P., Panapoy, M., and Ksapabutr, B. (2013). “Iron oxide-based supercapacitor from ferratrane precursor via sol-gel-hydrothermal process” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21.): 550-555.
  21. Deeswadi, S., Chaiyut, N., Panapoy, M., and Ksapabutr, B. (2012). “Pyrolyzed Macadamia Nut Shell Impregnated with KOH as Heterogeneous Base Catalyst for Biodiesel Production” International Conference on Green and Sustainable Innovation 2012, Le Meridien Chiang Mai Hotel, Chiang Mai, (May 25-26.): 164-169.
  22. Chalermkiti, T., Panapoy, M., and Ksapabutr, B. (2012). “Fabrication of Samarium Doped Ceria Electrolyte on Rough Glass Substrate with High Electrical Conductivity by Electrostatic Spray Deposition for Intermediate Temperature Solid Oxide Fuel Cell” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8.)
  23. รัฐพล พิชัยรัตน์ และ บุศรินทร์ เฆษะปะบุตร (2555). “การเตรียมคาร์บอนกัมมันต์จากกะลาปาล์มโดยการกระตุ้นด้วยกระบวนการทางกายภาพและทางเคมี” การประชุมเสนอผลงานวิจัยระดับบัณฑิตศึกษาแห่งชาติครั้งที่ 25, ศูนย์มานุษย์วิทยาสิรินธร, กรุงเทพฯ, (4-5 ตุลาคม) : 3100-3108.
  24. กันตวัฒน์ หมาดสุเรน, มาณพ ปานะโปย, ณัฐวุฒิ ชัยยุตต์ และ บุศรินทร์ เฆษะปะบุตร (2555) “ฟิล์มคอมพอสิตชีวภาพของไฮดรอกซีอะพาไทต์/ไคโตซานจากวัสดุเหลือทิ้งปศุสัตว์” การประชุมวิชาการระดับชาติมหาวิทยาลัยทักษิณ ครั้งที่ 22 ประจำปี 2555, ณ ศูนย์ประชุมนานาชาติฉลองสิริราชสมบัติครบ 60 ปี, จ.สงขลา (23-26 พฤษภาคม.)

ตำรา หนังสือ

  1. Ksapabutr, B., and Panapoy, M. (2010). Fabrication of Ceramic Nanofibers Using Atrane Precursor. In Kumar, A. (Ed.). Nanofibers (pp. 367-382). Vukovar. Intech.
  2. Ksapabutr, B., Panapoy, M., and Wongkasemjit, S. (2009). Fabrication of metal oxide nanocoatings: High electric field process. In Wongkasemjit, S. and Jamieson, A. M. (Ed.). Advanced metal and metal oxide technology (pp. 49-66). India. Transworld Research Network.
  3. Ksapabutr, B., and Panapoy, M. (2009). TiO2 nanoparticles and smart hybrids: Electrospray pyrolysis and optical applications. In Wongkasemjit, S. and Jamieson, A. M. (Ed.). Advanced metal and metal oxide technology (pp. 109-122). India. Transworld Research Network.
  4. ผศ.มาณพ ปานะโปย และ ผศ.ดร.บุศรินทร์ เฆษะปะบุตร. (2550). ระเบียบวิธีเชิงตัวเลขในงานวิทยาศาสตร์และวิศวกรรม โดยใช้ MATLAB. พิมพ์ครั้งที่ 1. นครปฐม: โรงพิมพ์มหาวิทยาลัยศิลปากร.

สิทธิบัตร

  1. มาณพ ปานะโปย, บุศรินทร์ เฆษะปะบุตร, ธนพล เฉลิมกิติ, เชาวน์วัศ ไหว้ครู, อรรถพล เอี่ยมศิลา “เครื่องพ่นสารละลายขนาดพกพาโดยใช้ไฟฟ้าสถิต” เลขที่สิทธิบัตร 23083. ออกให้ ณ วันที่ 11 มกราคม 2551.