International Proceedings

2022

  1. Threepopnatkul, P., and Preedanorawut, R. (2022). “Poly(lactic acid) and polybutylene succinate films incorporated with modified zeolite” Materials Today: Proceedings 65(P4): 2309–2314.
  2. Wiriyamontree, N., Chaiyut, N., Panapoy, M., and Ksapabutr, B. (2022). “Effect of PLA-PBAT compatibility and CNT content on the properties of PLA/PBAT/CNT composites” The 28th PPC Symposium on Petroleum and Petrochemicals and Polymers and the 13th Research Symposium on Petrochemical and Materials Technology, Chulalongkorn University, (June 23): 203-209.

2021

  1. Tannititam, P., Triamnak, N., and Chotigkrai, N. (2020). “Stepwise Oxidation of Methane to Methanol via Cerium-Doped Copper-Mordenite Catalysts” The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020) 2020, Nongnooch Garden, Pattaya, Thailand, (December 1-4): 57-62.
  2. Thongsamrit, W., Mangsup, T., Funchien, P., Sanglee, K., Suwanchawalit, C., Krajangsang, T., Suttiruengwong, S., and Triamnak, N. (2020). “A simple NiOx thin film preparation via solution spin coating and properties investigations for perovskite solar cells” The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020) 2020, Nongnooch Garden, Pattaya, Thailand, (December 1-4): 131-140.
  3. Klaychanpong, C., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2020). “Properties of TiO2 incorporated poly(lactic acid)/poly(butylene adipate-coterephthalate) active packaging films and their antimicrobial efficiency” The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020) 2020, Nongnooch Garden, Pattaya, Thailand, (December 1-4): 194-203.
  4. Bumrungnok, K., and Threepopnatkul, P. (2020). “Preparation and Characterization of Ductile Poly(lactic acid)/Poly (ethylene glycol) Blended Film Incorporated with Chain Extender via Cast Film Extrusion” The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020) 2020, Nongnooch Garden, Pattaya, Thailand, (December 1-4): 204-210.
  5. Buasri, A., Tanayapong, T., Cherdkun, N., Paengjun, N., and Loryuenyong, V. (2021). “Fabrication and Testing of Poly(Vinyl Alcohol)/Graphene Nanocomposites Films for Food Packaging” The 30th  TIChE Conference (TIChE2021) “Sustainable Development for Better Lives” Suranaree University of Technology, Nakhon Ratchasima, Thailand, (May 6-7): 315-320.
  6. Buasri, A., Chinaphong, T., Muangkum, P., Telakul, A., and Loryuenyong, V. (2021). “Green synthesis of reduced graphene oxide using pomelo peel and its application in electrochromic device” AIP Conference Proceedings 2397,070006. https://doi.org/10.1063/5.0063824.
  7. Songsiri, C., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2021). “Removal of Anionic Dye from Aqueous Solutions By Activated Carbon Derived From Water Hyacinth” The 27th PPC Symposium on Petroleum and Petrochemicals and Polymers and the 12th Research Symposium on Petrochemical and Materials Technology, Chulalongkorn University, (July 1): 219-224.
  8. Lapnonkawow, S., Nochaiya, T., Prongsamrong, P., Yabosdee, P. and Triamnak, N. (2021). “Cement Wood Properties with Addition of Cement Wood Waste Dust from Production Processes” 11th  International Science, Social Science, Engineering and Energy Conference, Fully Online Conference, (June 24-25): 173-177.
  9. Somboon, K., Hongsriphan, N., and Patanathabutr, P. (2021). “Influence of functionalized graphene and processing condition on electrical property of polyamide 11/functionalized graphene cast films” AIP Conference Proceedings 2397, (September 2021): 070007.
  10. Hansapalangkool, K., Hongsriphan, N., and Patanathabutr, P. (2021). “Mechanical property enhancement of recycled Poly(ethylene terephthalate) with Nylon6” AIP Conference Proceedings 2397, (September 2021): 070004.
  11. Threepopnatkul, P.,Thongloy, P., Janpromdee, W., Utamachote, S., and Phattarateera, S. (2021). “Effect of fruit peel extracts on properties of PVA composites films for agricultural applications” Materials Today: Proceedings 47: 3560-3564.
  12. Threepopnatkul, P., Sokjorhor, J., Homchan, P., and Khammee, W. (2021). “Preparation of hydrogel with self-healing properties based on poly(vinyl alcohol)/corn starch/zeolite/cellulose nanocrystals for wound dressing applications” Materials Today: Proceedings 52: 2467-2473.
  13. Srisirirat, C.,  Khuwijitjaru, P., Phupaichitkun, S., and Mahayothee, B. (2021). “Rapid assessment of water activity, moisture content, and total soluble solids in dried fruits and vegetables using near-infrared spectroscopy” Silpakorn International Conference on Total Art and Science 2021 in conjunction with the 2nd International Conference on Engineering and Industrial Technology 2021 (ICEIT 2021) The International Virtual Conference on Art, Science & Technology, and Social Science, Online Conference Thailand (November 3-5) : 23-29.
  14. Thongyoug, P., Tungtrongpairoj, J., Sooksaen, P., and Doungkeaw, K. (2021). “Effects of reinforcements on the hardness of composite seal rings” Materials Today: Proceedings 52: 2377-2380.
  15. Panloetparnich, W., Loryuenyong, V., and Buasri, A. (2021) “Facile synthesis of polyaniline-nickel oxide composites via interfacial polymerization” Materials Today: Proceedings 52: 2485-2489.
  16. Nuchnong, P., Seadan, M., and Suttiruengwong, S. (2021). “In Situ Compatibilization of PHBV/PBSA Blends: Synergistic Effect of Combined Reactions” The 21st International Union of Materials Research Societies-International Conference in Asia (IUMRS-ICA 2020), The Empress Convention Centre, Chiang Mai (February 23-26): 141-149.
  17. Phuangmili, I., Seadan, M., and Suttiruengwong, S. (2021). “Improving Water Resistance of Thermoplastic Starch/Polyvinyl alcohol Through in Situ Reactive Blends” The 21st International Union of Materials Research Societies-International Conference in Asia (IUMRS-ICA 2020), The Empress Convention Centre, Chiang Mai (February 23-26): 150-155.
  18. Meejamrus, A., Seadan, M., and Suttiruengwong, S. (2021). “Modification of Water Repellent Property of Poly(butylene adipate-co-terephthalate)(PBAT)” The 21st International Union of Materials Research Societies-International Conference in Asia (IUMRS-ICA 2020), The Empress Convention Centre, Chiang Mai (February 23-26): 156-161.

2020

  1. Sasaengta, D., Panapoy, M., Chaiyut, N.,and Ksapabutr, B. (2020). “Efficient removal of methylene blue by low-cost and biodegradable highly effective adsorbents based on biomass in the fixed bed column” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  2. Pusri, C., Ksapabutr, B., Chaiyut, N., and Panapoy, M. (2020). “Performance of lightweight cement board using coconut coir fiber and expanded polystyrene foam waste” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  3. Thepthong, C., Ksapabutr, B., Chaiyut, N.,and Panapoy, M. (2020).“Enhanced mechanical performance of cement board composite reinforced with coconut coir fiber and tire rubber waste” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  4. Klaychanpong, C., Ksapabutr, B., Panapoy, M., and Chaiyut, N. (2020). “Properties of TiO2 incorporated poly(lactic acid)/poly(butylene adipate-coterephthalate) active packaging films and their antimicrobial efficiency” The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020) 2020, Nongnooch Garden, Pattaya, Thailand, (December 1-4) : 194-203.
  5. Saraphat, K., Phaorung, R., Saengsuk, U., and Hemsri, S. (2020). “Biodegradable poly(butylene adipate-co-terephthalate)/wheat gluten blends: Effect of PBAT modification on morphological, mechanical and water adsorption properties” IOP Conference Series: Materials Science and Engineering, 773(1) (March 2020) : 1-4.
  6. Thongpin, C.,Buaksuntear, K., Tanprasert, T., and Charoenta, J. (2020). “Bio-based thermoplastic vulcanizates from natural rubber (bioplastic/NR)” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-5.
  7. Jaroenta, J., Siangsawad, R., Onkate, R., Jearjiratikul, V., and Thongpin, C.(2020). “Study of rubber composites between natural rubber and Mahogany Shell Powder (MHSP) and potential for pavement block” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  8. Thongpin, C.,Jumpathong, K., Jaroenjai, R., Bunwanna, W., and Jareanta, J. (2020). “Effect of composition ratios and mixing steps on properties of BR/NR/NBR blends and blends foam”  IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  9. Preedanorawut, R., Threepopnatkul, P.,and Sittatrakul, A. (2020). “Effect of zeolite types on properties of polybutylene succinate/polylactic acid films” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  10. Threepopnatkul, P.,Wongsuton, K., Jaiaue, C., Rakkietwinai, N., and Kulsetthanchalee, C. (2020). “Thermal and barrier properties of poly(butylene adipate-coterephthalate) incorporated with zeolite doped potassium ion for packaging film” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  11. Hongsriphan, N.,Kamsantia, P., Sillapasangloed, P., and Loychuen, S. (2020). “Bio-based composite from poly(butylene succinate) and peanut shell waste adding maleinized linseed oil” IOP Conference Series: Materials Science and Engineering 773(1), (March 2020) : 1-4.
  12. Kruemek, P., Mattathankul, S., Triamnak, N.,Chotigkrai, N. (2020). “A facile synthesis of CuCe and CuCeFe mixed-oxide catalysts by solution combustion method for catalytic methane combustion” IOP Conference Series: Materials Science and Engineering 778(1), (April 2020) : 1-6.
  13. Kongroiyu, P., and Lerdwijitjarud, W. (2020). “Cellulose/oligo-chitosan hydrogel: preparation and water-absorption behavior” The Pure and Applied Chemistry International Conference 2020 (PACCON2020), IMPACT Forum, Muangthong Thani, Nonthaburi, (February 13-14) : PC77 – PC82.
  14. Ployeam, N., and Lerdwijitjarud, W. (2020). “Influence of surfactant on a preparation of poly(acrylic acid)/styrenebutadiene-rubber hybrid material via high internal phase emulsion technique” The Pure and Applied Chemistry International Conference 2020 (PACCON2020), IMPACT Forum, Muangthong Thani, Nonthaburi, (February 13-14) : PC83 – PC89.
  15. Moolsri, W., and Phupaichitkun, S. (2020). “Using portable type and conveyor belt system type VIS-NIR spectrometer to predict the CIE L*a*b* color value” The Pure and Applied Chemistry International Conference 2020 (PACCON2020), IMPACT Forum, Muangthong Thani, Nonthaburi, (February 13-14) : PC224 – PC229.
  16. Sudta, W., and Hemsri, S. (2020). “Study on Morphological and Mechanical Properties
    of Poly(Butylene Adipate-co-Terephthalate) and Cassava Starch Blend” The International Conference on Engineering and Industrial Technology (ICEIT2020), The ZIGN Hotel, Pattaya, Thailand, (September 11–13) : 167-172.
  17. Phuengprai, J., and Hemsri, S. (2020). “Mechanical and Morphological Properties of Gelatin and
    Poly(Butylene Adipate-co-Terephthalate) Blend” The International Conference on Engineering and
    Industrial Technology (ICEIT2020), The ZIGN Hotel, Pattaya, Thailand, (September 11–13) : 173-179.
  18. Sriphattarapan, P., Patanathabutr, P., and Hongsriphan, N. (2020). “Influence of Different Grade of Recycled Poly(Ethylene Terephthalate) on Oxygen Permeability of Poly(Lactic Acid)/Recycled Poly(Ethylene Terephthalate) Cast Films” The 26th PPC Symposium on Petroleum, Petrochemicals, and Polymers and The 11th Research Symposium on Petrochemical and Materials Technology, The Petroleum and petrochemical college Chulalongkorn University, (July 23) : 579-584.
  19. Thaiprasong, P., Chaiyut, N., Ksapabutr, B., and Panapoy, M. (2020). “Fabrication and Properties of PBAT/Urea Sheets for Agricultural Applications” The 26th PPC Symposium on Petroleum, Petrochemicals, and Polymers and The 11th Research Symposium on Petrochemical and Materials Technology, The Petroleum and petrochemical college Chulalongkorn University, (July 23) : 585-589.
  20. Rattanapan, C., Loryuenyong, V., and Buasri, A. (2020). “The Green Synthesized Reduced Graphene Oxide (RGO) Doped PEDOT:PSS Composite for Electrical Improvement” The 5th RSU National and International Research Conference on Science and Technology, Social Science, and Humanities 2020. Online Conference, Rangsit University, (May 1) : 687-693.
  21. Thongpin, C., Wongprat, C., Srithavorn, P., and Muenchee, P. (2020). “Effect of Glycerol on Gluten filled in Natural Rubber/WG Blend” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-7.
  22. Thongpin, C., Theanchai, K., Riangpha, P., and Anantawut, W. (2020). “The effect of rotor speed on EVA/PBAT blend using Twin screw extruder and foamability of EVA/PBAT blend” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-7.
  23. Khieomuang, J., and Thongpin, P. (2020). “Fabrication of non-woven hybrid natural fiber/poly(lactic acid) composite via prepreg lamination” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-6.
  24. Srikham, J., and Thongpin, C. (2020). “Foamability of Natural rubber (NR)/Poly(butylenes adipateco-terephthalate) (PBAT) Thermoplastic Vulcanizate with OBSH as a blowing agent” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-7.
  25. Arssanasuwan, N., and Threepopnatkul, P., and Sittattrakul, A. (2020). “Effect of titanium dioxide on the properties of poly(butylene adipate-co-terephthalate) films” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-6.
  26. Bualuang, W., Threepopnatkul, P.,and Sittattrakul, A. (2020). “Mechanical properties and foaming behavior of Poly(lactic acid) blend Polybutylene Succinate” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-7.
  27. Khanteesa, R., Threepopnatkul, P., and Sittattrakul, A. (2020). “ Effect of poly(ethylene oxide) on the properties of poly(lactic acid)-based blends” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-5.
  28. Threepopnatkul, P., Thinsoongnoen, P., Misut, P., Autama, S., and Kulsetthanchalee, C. (2020). “Preparation and characterization of PET/SEBS incorporated with organomontmorillonite” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-7.
  29. Panloetparnich, W., Loryuenyong, V., and Buasri, A. (2020). “The preparation of composites between polyaniline-silver (PANI-Ag) via interfacial polymerization” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-7.
  30. Loryuenyong, V., Kornsawat, J., Nakhowong, W., Klinjan, W. and Buasri, A. (2020). “The temperature-dependent structural and optical properties of SrAl2O4-based phosphor” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-7.
  31. Phiwchaaum, C., Ksapabutr, B., Chaiyut, N., and Panapoy, M. (2020). “Kinetic study for the co-pyrolysis of water hyacinth biomass with waste polystyrene” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-11.
  32. Hemsri, S., Puttiwanit, K., Saeaung, K., and Satung, P. (2020). “Low density polyethylene/poly(butylene adipate-coterephthalate) films: Effect of a compatibilizer on morphology and properties” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-7.
  33. Sooksaen, P., and Thongyoug, P. (2020). “Deterioration of Open-cell Aluminum Foam in Strong Sulfuric Acid” IOP Conference Series: Materials Science and Engineering 965, (December 2020) : 1-6.
  34. Tannititam, P., Triamnak, N., and Chotigkrai, N. (2020). “Stepwise Oxidation of Methane to Methanol via Cerium-Doped Copper-Mordenite Catalysts” The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020) 2020, Nongnooch Garden, Pattaya, Thailand, (December 1-4) : 57-62.
  35. Thongsamrit, W., Mangsup, T., Funchien, P., Sanglee, K., Suwanchawalit, C., Krajangsang, T., Suttiruengwong, S., and Triamnak, N. (2020). “A simple NiOx thin film preparation via solution spin coating and properties investigations for perovskite solar cells” The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020) 2020, Nongnooch Garden, Pattaya, Thailand, (December 1-4) : 131-140.
  36. Bumrungnok, K., and Threepopnatkul, P. (2020). “Preparation and Characterization of Ductile Poly(lactic acid)/Poly (ethylene glycol) Blended Film Incorporated with Chain Extender via Cast Film Extrusion”  The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020) 2020, Nongnooch Garden, Pattaya, Thailand, (December 1-4) : 204-210.

2019

  1. Insung, T., Chaiyut, N., Ksapabutr, B., and Panapoy, M. (2019). “Preparation and properties of silane-treated banana fiber/poly(lactic acid) biocomposites” IOP Conference Series: Materials Science and Engineering 544(1), 012011.
  2. Hongsriphan, N., Chaichana, J., Pornpitakdamrong, C., and Thaptham, S. (2019). “Bond strength of laminated films between poly(lactic acid) based cast films and metalized cast polypropylene films” IOP Conference Series: Materials Science and Engineering 526(1), 012007.
  3. Aussawasathien, D., Ketkul, K., Hrimchum, K., and Threepopnatkul, P. (2019). “Effects of poly(lactic acid) and polybutylene succinate ratios on properties of composite foams containing activated carbons” AIP Conference Proceedings 2065, (6 February 2019) : Article number 030046.
  4. Threepopnatkul, P. and Kulsetthanchalee, C. (2019). “Effect of sisal fiber on flexural and impact properties of PMMA-b-PU composites” Materials Today: Proceedings 17, (2019) : 2002-2009.
  5. Samleekaew, K., and Thongpin, C. (2019). “Effect of Screw Speed on Morphology, Tensile and Thermal Properties of In-situ Fibrillation PLA/LLDPE Blend”Pure and Applied Chemistry International Conference 2019 (PACCON 2019), Bangkok International Trade & Exhibition Centre (BITEC), Bangkok, Thailand, (February 7-8) : PO71-PO76.
  6. Charoenta, J. and Thongpin, C. (2019). “Thermoplastic Vulcanizate Foam Prepared from NR/PBS Blends” Pure and Applied Chemistry International Conference 2019 (PACCON 2019), Bangkok International Trade & Exhibition Centre (BITEC), Bangkok, Thailand, (February 7-8) : PO77-PO82.
  7. Rattana, A., and Hemsri, S. (2019). “Morphologies and Properties of Linear Low Density Polyethylene/Poly(butylene adipate-co-terephthalate) Films” Pure and Applied Chemistry International Conference 2019 (PACCON 2019), Bangkok International Trade & Exhibition Centre (BITEC), Bangkok, Thailand, (February 7-8) : PO95-PO100.
  8. Chantanapho, N. and Thongpin, C. (2019). “The Dynamic Vulcanization of Polycarprolactone (PCL)/Natural Rubber (NR) Blend Using Phenolic Curing System” Pure and Applied Chemistry International Conference 2019 (PACCON 2019), Bangkok International Trade & Exhibition Centre (BITEC), Bangkok, Thailand, (February 7-8) : PO101-PO106.
  9. Aussawasathien, D., Ketkul, K., Hrimchum, K., and Threepopnatkul, P. (2019). “Effects of poly(lactic acid) and polybutylene succinate ratios on properties of composite foams containing activated carbons” AIP Conference Proceedings 2065, (6 February 2019) : Article number 030046.
  10. Bunroek, P., and Sooksaen, P. (2019). “Development of Nano TiO2 Coated Cement Surface Degradation Properties by the Photocatalytic” IOP Conf. Series: Materials Science and Engineering 625 (2019) 012021, doi:10.1088/1757-899X/625/1/012021.
  11. Chunsakul, T., Seadan, M., and Suttiruengwong, S. (2019). “Copolycarbonate Derived from Carbon Dioxide as Toughness Improvement for Poly (lactic acid)” Materials Today: Proceedings 17 (2019) : 1949–1955.
  12. Hongsriphan, N., Patanatabutr, P., Nongyai, N., Pariyathada, N., and Torudomsak, S. (2019). “Mechanical and Thermal Properties of Blends Between Poly(Butylene Succinate) and Polyamide 12” Materials Today: Proceedings 17 (2019) : 1977–1986.
  13. Sooksaen, P., Sudyod, N., Thongtha, N., and Simsomboonphol, R. (2019). “Fabrication of Lightweight Foam Glasses for Thermal Insulation Applications” Materials Today: Proceedings 17 (2019) : 1823–1830.
  14. Loryuenyong, V., Khadthiphong, A., Phinkratok, J., Watwittayakul, J., Supawattanakul, W., and Buasri, A. (2019). “The fabrication of graphene-polypyrrole composite for application with dye-sensitized solar cells” Materials Today: Proceedings 17, (2019) : 1675-1681.
  15. Patanathabutr, P., Jaichueai, J., Onlamai, S., Ninbut, S., and Hongsriphan, N. (2019). “Influence of surface modified-cotton fibers on the mechanical and thermal properties of 3D printed poly (lactic acid) biocomposites after accelerated weathering condition” Aachen-Dresden-Denkendorf International Textile Conference, Dresden, Germany, (November 28-29) : 9 pages
  16. Yongvanich, N., Jitpagdee, T., Chukaew, B., and Papathe, S. (2019). “Yellow ceramic pigments from amorphous nanosized oxides using rice husk and zircon” Proceedings of the 14th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2019 8915653 : 225-228.

2018

  1. Yongvanich, N., Phanthasri, J., Manomaipermpoon, P., and Noithai, K. (2018). “Development of Zn-Al-Cr-O spinel ceramic color pigment nanopowders by pechini method” Proceedings of the 2017 IEEE Nanotechnology Materials and Devices Conference, Singapore, (October 2-4) : 169-170.
  2. Yata, N., and Lerdwijitjarud, W. (2018). “Influence of linseed oil and its mono-glyceride on moisture absorption and mechanical properties of thermoplastic starch” The 8th National and International Graduate Study Conference (NGSC&IGSC 2018) “Thailand 4.0 Creative Innovation for Sustainable Development”, PRINCESS MAHA CHAKRI SIRINDHON ANTHROPOLOGY CENTRE, (June 28-29) : S212-S218.
  3. Hongsriphan, N., Chutivasanaskun, K., Kantipongpipat, P., Thanokiang, J., and Patanathabutr, P. (2018). “Rheological and Viscoelastic Properties of Poly(Butylene Succinate)/ Poly(Ethylene Terephthalate) Blends” The International Polymer Conference of Thailand (PCT-8), Amari Watergate Hotel, Bangkok, (June 14-15) : 82-88.
  4. Kanchanawaleekun, K., Hongsriphan, N., and Patanathabutr, P. (2018). “Preparation of Poly(Lactic Acid)/Alumina Composites For Dentistry Application” The International Polymer Conference of Thailand (PCT-8), Amari Watergate Hotel, Bangkok, (June 14-15) : 144-148.
  5. Seaphu T., and Hongsriphan, N. (2018). “Effect Of Hollow Glass Microspheres Treated with Different Coupling Agent on Properties of Polyamide 11 Composites” The International Conference on Advanced and Applied Petroleum, Petrochemicals, and Polymers 2018, Chulalongkorn Main Auditorium and Maha Chulalongkorn Building, Chulalongkorn University, (December 18-20) : 27-32.
  6. Threepopnatkul, P., and Kulsetthanchalee, C. (2018). “Effect of ZnO and TiO2 on properties of polymstyrene/nitrile rubber electrospun fiber mats” Materials Today: Proceedings 5, (2018) : 10917 – 10924.
  7. Threepopnatkul, P., Tongtun, P., Suesuan, R., Panawes, S., and Kulsetthanchalee, C. (2018). “Mechanical and thermal properties of reprocessed ABS with its improved impact property by blending with NBR” The Pure and Applied Chemistry International Conference 2018 (PACCON 2018), The 60th Anniversary of His Majesty the King’s Accession to the Throne International Convention Center, Hat Yai, Songkhla, Thailand, (February 7-9 ) : PO132- PO137.
  8. Sittattrakul, A., Threepopnakul, P., Peevalaisirikorn, K., Sriklum, P., and Majchacheep, W. (2018). “Preparation and properties of modified polystyrene and amino alcohol rubber blends” The Pure and Applied Chemistry International Conference 2018 (PACCON 2018), The 60th Anniversary of His Majesty the King’s Accession to the Throne International Convention Center, Hat Yai, Songkhla, Thailand, (February 7-9 ) : PO143- PO148.
  9. Khankrua, R., Chinsaard, T., Chiaranai, P., and Suttiruengwong, S. (2018). “Mechanical and Thermal Properties of Film Based On Poly (Lactic Acid)/Ethylene Vinyl Acetate Copolymer Blends” The 14th  Eco-Energy and Materials Science and Engineering Symposium 2018, Kyoto University, Japan, (April 3-6) : 73-78.
  10. Jeensikhong, K., Suttiruengwong, S., and Seadan, M. (2018). “Reactive Compatibilization of Poly (3-hydroxybutyrate) and Polylactic Acid Blends” The 14th Eco-Energy and Materials Science and Engineering Symposium 2018, Kyoto University, Japan, (April 3-6) : 100-104.
  11. Tocuweang, K., Suttiruengwong, S., Seadan, M., and Lertwanawatana, W. (2018). “Facile Preparation of Polylactic acid/Thermoplastic Starch Blend: Improved Compatibilization” The 14th Eco-Energy and Materials Science and Engineering Symposium 2018, Kyoto University, Japan, (April 3-6) : 105-110.
  12. Kantipongpipat, P., Suttiruengwong, S., Seadan, M., and Amornsakchai, T. (2018). “Thermal and Mechanical Properties of Poly(lactic acid)/Pineapple Leaf Fibers/Silica Hybrid Composites” The 14th Eco-Energy and Materials Science and Engineering Symposium 2018,  Kyoto University, Japan, (April 3-6) : 159-163.
  13. Sukma, D., Suttiruengwong, S., Chatchuenyot, S., and Seadan, M. (2018). “Application on smart tensile testing machine with ultrasonic sensor in strain measurement” The 14th Eco-Energy and Materials Science and Engineering Symposium 2018,  Kyoto University, Japan, (April 3-6) : 164 -169.
  14. Buaksuntear, K., and Thongpin, C. (2018). “Effect of rotor speed of mixing and blend ratios on properties of PBAT/NR blends and PBAT/NR vulcanizates” Asian Workshop on Polymer Processing 2018, Chiang Mai, Thailand, (December 10-13) : 5-10.
  15. Samleekaew, K., and Thongpin, C. (2018). “Effect of screw speed on morphology and properties of in-situ fibrillation PLA/LDPE blend” Asian Workshop on Polymer Processing 2018, Chiang Mai, Thailand, (December 10-13) : 15-19.
  16. Charoenta, J., and Thongpin, C. (2018). “Preparation of Bio-based thermoplastic vulcanizates from natural rubber and Polybutylene succinate blend” Asian Workshop on Polymer Processing 2018, Chiang Mai, Thailand, (December 10-13) : 20-24.
  17. Gongarsa, S., Lerdwijitjarud, W., and Sittattrakul, A. (2018). “Preparation of Bio-based Resin from Epoxidized Soybean Oil and Oligomer of 1,4-Butanediol and Succinic Acid: Effect of Reagent Ratio and Catalyst Content on Curing Kinetic” Asian Workshop on Polymer Processing 2018, Chiang Mai, Thailand, (December 10-13) : 25-30.
  18. Thampanya, N., Lerdwijitjarud, W., and Sittattrakul, A. (2018). “Reactive Blending between Maleated Thermoplastic Starch and Maleated Polycaprolactone: Study on Morphology and Mechanical Properties” Asian Workshop on Polymer Processing 2018, Chiang Mai, Thailand, (December 10-13) : 31-35.
  19. Lerdsuriyakun, R., and Lerdwijitjarud, W. (2018). “Development of Cellulose/Beta-Cyclodextrin Copolymer for Caffeine Absorption” Asian Workshop on Polymer Processing 2018, Chiang Mai, Thailand, (December 10-13) : 36-40.
  20. Thaptham, S., and Hongsriphan, N. (2018). “Bio-based Blends of Poly(lactic acid) and Polyamide 11 with the Addition of Poly(lactic acid) Grafted with Maleic Anhydride” Asian Workshop on Polymer Processing 2018, Chiang Mai, Thailand, (December 10-13) : 41-46.
  21. Wongwisitchai, P., Hongsriphan, N. and Patanathabutr, P. (2018). “Effect of Printing Speed on Thermal and Mechanical Properties of Rapid Prototyped Samples for Shipping Packaging” Asian Workshop on Polymer Processing 2018, Chiang Mai, Thailand, (December 10-13) : 47-52.
  22. Khwanpipat, T., Suttiruenwong, S., and  Seadan, M. (2018). “How Nucleating Agents Affect the Nucleation Efficiency of Poly(L-Lactic acid)” Asian Workshop on Polymer Processing 2018, Chiang Mai, Thailand, (December 10-13) : 53-58.
  23. Rattanapan, C., Jankaenkaew, C., Sirithiwakorn, T., Loryuenyong, V., and Buasri, A. (2018). “Application of bioplastics and thermal reduced graphene oxide in electrochromic devices” Materials Today: Proceedings 5(7), (2018) : 14868-14873.
  24. Buasri, A., Ongmali, D., Sriboonpeng, P., Prompanut, S., and Loryuenyong, V. (2018). “Synthesis of PET-PLA copolymer from recycle plastic bottle and study of its applications in the electrochromic devices with graphene conductive ink” Materials Today: Proceedings 5(5), (2018) : 11060-11067.

2017

  1. Tippuwanan, C., Thongpin, C., and Lopattananon, N. (2017). “In-situ fibrillation of LLDPE in PLA/LLDPE blend films: Effect on mechanical properties and thermal properties” Pure and Applied Chemistry International Conference 2017 (PACCON 2017), Centra Government Complex Hotel & Convention Centre Chaeng Watthana, Bangkok, Thailand, (February 2-3) : 1465-1470.
  2. Borkaew, K., and Hongsriphan, N. (2017). “Influence of peroxide initiator on biodegradable blends between polybutylene succinate and poly(butylene adipate-co-terephthalate)” Pure and Applied Chemistry International Conference 2017 (PACCON 2017), Centra Government Complex Hotel & Convention Centre Chaeng Watthana, Bangkok, Thailand, (February 2-3) : 1476-1482.
  3. Yangcheepyuenyoodee, N., and Hongsriphan, N. (2017). “Modification of bio-polybutylene succinate flexible films by poly(butylene adipate-co-terephthalate)” Pure and Applied Chemistry International Conference 2017 (PACCON 2017), Centra Government Complex Hotel & Convention Centre Chaeng Watthana, Bangkok, Thailand, (February 2-3) : 1483-1488.
  4. Tanprasert, T., Thongpin, C., and Lopattananon, N. (2017). “Preparation of thermoplastic elastomer from natural rubber and polycaprolactone blend” Pure and Applied Chemistry International Conference 2017 (PACCON 2017), Centra Government Complex Hotel & Convention Centre Chaeng Watthana, Bangkok, Thailand, (February 2-3) : 1494-1499.
  5. Buaksuntear, K., Thongpin, C., and Lopattananon, N. (2017). “Preparation of thermoplastic elastomers from natural rubber and Poly(butylene adipate-co-terephthalate) blends” Pure and Applied Chemistry International Conference 2017 (PACCON 2017), Centra Government Complex Hotel & Convention Centre Chaeng Watthana, Bangkok, Thailand, (February 2-3) : 1500-1506.
  6. Buasri, A., Rattanapan, C., Jankaenkaew, C., Sirithiwakorn, T., and Loryuenyong, V. (2017). “The Fabrication of Electrochromic Devices Based on Reduced Graphene Oxide/Polylactide Thin Films” 2017 World Congress on Micro and Nano Manufacturing (WCMNM 2017), Kaohsiung, Taiwan, (March 27-30) : 389-390.
  7. Intajak, J., and Phupaichikun, S. (2017). “Plastic type discrimination using SWNIR” The 3rd International Conference on Conference on Applied Physics and Materials Applications (ICAPMA2017), Pattaya, Thailand, (May 31 – June 2) : 39-43.
  8. Chunsakul, T., and Suttiruengwong, S. (2017). “Thermal properties of poly (butylene carbonate) and its modification” The 7th National and International Graduate Study Conference 2017 “Thailand 4.0 Creative Innovation for Sustainable Development” The Graduate School, Silpakorn University, (July 20-21) : I503-I512.
  9. Phatharapeetranun, N., Gadea, C., Ksapabutr, B., and Esposito, V. (2017). “Assembly Three Dimensional Bismuth Titanate (3D-BiT) by Extrusion-Based Fuse Deposition Modeling Technique” Proceedings of Acadimics World 77th International Conference, Bangkok, Thailand, (September 5-6) : 1-5.
  10. Nanthananon, P., Seadan, M., Pivsa-Art, S., Hiroyuki, H., and Suttiruengwong, S. (2017). “A study on reactive compatibilization of short-fiber reinforced poly (lactic acid) biocomposite” The 6th   International Conference on Biobased and Biodegradable Polymers, Mons, (September 11-13) : 1-2.
  11. Suttiruengwong, S. and Seadan, M. (2017). “High impact modification of polylactic acid via reactive blends” The 6th International Conference on Biobased and Biodegradable Polymers, Mons, (September 11-13) : 1-3.
  12. Tippuwanan, C., Thongpin, C., and Lopattananon, N. (2017). Study effect of organoclay on in-situ fibrillation of LLDPE in PLA/LLDPE blend films: Effect on morphology, mechanical properties and thermal stability” The 6th International Conference on Biobased and Biodegradable Polymers, Mons, (September 11-13) : 1-2.
  13. Kokrue, N., Hongsriphan, N., and Thongpin, C. (2017). “Carbon dioxide barrier properties of polybutylene succinate coating with microcrystalline cellulose” The 6th International Conference on Biobased and Biodegradable Polymers, Mons, (September 11-13) : 1-2.
  14. Nanthananon, P. Seadan, M., Pivsa-Art, S., Hiroyuki, H., and Suttiruengwong, S. (2017). “Biodegradable polysters reinforced with eucalyptus fiber: Effect of reactive agents” AIP Conference Proceedings, 1914, (December 14) : 070012-1-070012-5.
  15. Buasri, A., and Loryuenyong, V. (2017). “Application of waste materials as a heterogeneous catalyst for biodiesel production from Jatropha Curcas oil via microwave irradiation” Materials Today: Proceedings, 4(5) : 6051-6059.
  16. Phongtongpasuk, S., Poadang, S., and Yongvanich, N. (2017). “Green synthetic approach to prepare silver nanoparticles using longan (Dimocarpus longan) peel extract and evaluation of their antibacterial activities” Materials Today: Proceedings, 4(5) : 6317-6325.
  17. Sooksaen, P., Chulasinont, O., Janmat, P., and Thovasakul, W. (2017). “Chemical treatment on aluminum alloy for hydrophobic surfaces” Materials Today: Proceedings, 4(5) : 6528-6533.
  18. Thongsong, W., Kulsetthanchalee, C., and Threepopnatkul, P. (2017). “Effect of polybutylene adipate-co-terephthalate on properties of polyethylene terephthalate thin films” Materials Today: Proceedings, 4(5) : 6597-6604.
  19. Threepopnatkul, P., Sittattrakul, A., Supawititpattana, K., Jittiarpon, P., Raksawat, P., and Kulsetthanchalee, C. (2017). “Effect of bacterial cellulose on properties of poly(lactic acid)” Materials Today: Proceedings, 4(5) : 6605-6614.
  20. Seesorn, J., Wee., Y. K., Seadan, M., and  Suttiruengwong, S. (2017). “Polylactic acid plasticized by isosorbide ester and adipate: mechanical and rheological performance” The First Materials Research Society of Thailand International Conference, The Empress Convention Center, Chiang Mai, Thailand, (October 31 – November 3) : 143-152.
  21. Keeratipinit, K., Seadan, M., Lertwanawatana, W., and Suttiruengwong, S. (2017). “Preparation of High Strength Thermoplastic Starch” The First Materials Research Society of Thailand International Conference, The Empress Convention Center, Chiang Mai, Thailand, (October 31 – November 3) : 160-182.
  22. Buaksuntear K., and Thongpin, C. (2017). “Effect of liquid MAH-g-polyisoprene and NR-g-GMA on natural rubber/poly(butylene adipate-co-terephthalate) blend” The First Materials Research Society of Thailand International Conference, The Empress Convention Center, Chiang Mai, Thailand, (October 31 – November 3) : 183-191.
  23. Tanprasert, T., and Thongpin, C. (2017). “Preparation and characterization of natural rubber (NR)/polycaprocactone (PCL) blend compatibilized with NR-g-GMA and IR-g-MAH” The First Materials Research Society of Thailand International Conference, The Empress Convention Center, Chiang Mai, Thailand, (October 31 – November 3) : 192-201.
  24. Kokrue, N., Hongsriphan, N., and Thongpin, C. (2017). “Gas barrier properties of poly(butylene succinate) coating with modified microcrystalline cellulose” The First Materials Research Society of Thailand International Conference, The Empress Convention Center, Chiang Mai, Thailand, (October 31 – November 3) : 202-213.
  25. Borkaew, K., and Hongsriphan, N. (2017). “Biodegradable composite films from Bio-PBS and spent coffee grounds” The First Materials Research Society of Thailand International Conference, The Empress Convention Center, Chiang Mai, Thailand, (October 31 – November 3) : 214-221.
  26. Thongpin, C. (2017) “Effect of types of organic modified Clays and master batch on mechanical properties of NR/ENR/NBR blend” The First Materials Research Society of Thailand International Conference, The Empress Convention Center, Chiang Mai, Thailand, (October 31 – November 3) : 222-229.
  27. Tippuwanan, C., and Thongpin, C. (2017). “Study effect of organoclay on in-situ fibrillation of LDPE in PLA/LDPE blend films : Effect on morphology, mechanical properties and thermal stability” The First Materials Research Society of Thailand International Conference, The Empress Convention Center, Chiang Mai, Thailand, (October 31 – November 3) : 176-182.
  28. Kaewna, C., and Thongpin, C. (2017). “The study of NR/BR/NBR ternary blends: Tensile properties and Tension set” The First Materials Research Society of Thailand International Conference, The Empress Convention Center, Chiang Mai, Thailand, (October 31 – November 3) : 266-272.

2016

  1. Sooksaen, P. (2016). “Surface characterization of hydroxyapatite-bioglass composites” The Pure and Applied Chemistry International Conference 2016 (PACCON2016), Bangkok International Trade and Exhibition Centre (BITEC), Bangkok, Thailand, (February 9-11): 977-981.
  2. Kritape, N., Chuawittayawut, T., Wachirahuttapong, S., Kattiyaboot, T. and Thongpin, C. (2016). “Properties of PLA/PEG blend modified with Luperox 101” The Pure and Applied Chemistry International Conference 2016 (PACCON2016), Bangkok International Trade and Exhibition Centre (BITEC), Bangkok, Thailand, (February 9-11): 840-845.
  3. Khruathong, S. and Thongpin, C. (2016). “The preparation of thermoplastic elastomer from epoxidized natural rubber/low density polyethylene” The Pure and Applied Chemistry International Conference 2016 (PACCON2016), Bangkok International Trade and Exhibition Centre (BITEC), Bangkok, Thailand, (February 9-11): 777-782.
  4. Chuawittayawut, T. and Thonpin, C. (2016). “The effect of type and size of palm based fibers on crystallization of PLA” The Pure and Applied Chemistry International Conference 2016 (PACCON2016), Bangkok International Trade and Exhibition Centre (BITEC), Bangkok, Thailand, (February 9-11): 749-753.
  5. Talbumrung, T. and Thongpin C. (2016). “In-situ micro fibrillation of LDPE form during extrusion and effect on thermal properties of PLA/LDPE blends” The Pure and Applied Chemistry International Conference 2016 (PACCON2016), Bangkok International Trade and Exhibition Centre (BITEC), Bangkok, Thailand, (February 9-11): 754-759.
  6. Buaksuntear, K., Tippuwanan, C., Tanprasert, T. and Thongpin, C. (2016). “UV cured polyurethane coating prepared from PET bottle waste based polyol” The Pure and Applied Chemistry International Conference 2016 (PACCON2016), Bangkok International Trade and Exhibition Centre (BITEC), Bangkok, Thailand, (February 9-11): 743-748.
  7. Hongsriphan, N. (2016). “Influence of chemical treatment and fiber content on color and properties of renewable wood composite using Ironwood saw dust” The Pure and Applied Chemistry International Conference 2016 (PACCON2016), Bangkok International Trade and Exhibition Centre (BITEC), Bangkok, Thailand, (February 9-11): 1217-1222.
  8. Threepopnatkul, P., Boontem, K., Khetkhan, S., Thong-aia, S. and Kulsetthanchalee, C. (2016). “Effect of banana leaf fiber on mechanical properties of PP/HDPE filament” The Pure and Applied Chemistry International Conference 2016 (PACCON2016), Bangkok International Trade and Exhibition Centre (BITEC), Bangkok, Thailand, (February 9-11): 1171-1175.
  9. Chalom, S., and Thongpin, C. (2016). “Comparison of glycidyl methacrylate grafting on NR and ENR prepared by solution system” The Pure and Applied Chemistry International Conference 2016 (PACCON2016), Bangkok International Trade and Exhibition Centre (BITEC), Bangkok, Thailand, (February 9-11): 772-776.
  10. Sooksaen, P. and Puathawee, P. (2016). “Utilization of Aluminum Dross Residue Waste in the Fabrication of Ceramic Tiles” A&WMA’s 109th Annual Conference & Exhibition, Hyatt Regency, New Orleans, Louisiana, (June 20-23): 1-13.
  11. Nakkharat, P. and Hemsri, S. (2016). “Effect of blowing agent content on morphology, mechanical properties and water resistance of wheat gluten/gelatinized wheat starch foams” International Polymer Conference of Thailand (PCT-6), Pathumwan Princess Hotel, Bangkok, Thailand, (June 30-July 1): 144-149.
  12. Chalom, S. and Thongpin, C. (2016). “Study the effect of GMA grafting on natural rubber molecule of blending characteristic of PLA/NR” International Polymer Conference of Thailand (PCT-6), Pathumwan Princess Hotel, Bangkok, Thailand, (June 30-July 1): 294-299.
  13. Preamnim, N., Chaiyut, N., and Ksapabutr, K. (2016). “Preparation and properties of bacterial cellulose reinforced poly(lactic acid) composite” International Polymer Conference of Thailand (PCT-6), Pathumwan Princess Hotel, Bangkok, Thailand, (June 30-July 1): 391-395.
  14. Thongpin, C., Supanil, T., Hemsri, S., and Lopattananon, N. (2016). “Bio-composite of hybrid natural fibers fabric reinforced PLA” Aachen-Dresden-Denkendorf International Textile Conference, Dresden, Germany, (November 24-25): 11 Pages.
  15. Patanathabutr, P. (2016). “Improvement of Mechanical Properties and Colorfastness of Natural Dyed Aluminium Silicate/PLA Composites” Aachen-Dresden-Denkendorf International Textile Conference, Dresden, Germany, (November 24-25): 8 Pages.
  16. Chuawittayawut, T., Thongpin, C., and Lopattananon, N. (2016). “The Effect of Heat Treatment on Thermal and Mechanical Properties of Polylactic Acid Reinforce with Palm Based Fibers” Aachen-Dresden-Denkendorf International Textile Conference, Dresden,  Germany, (November 24-25): 20 Pages.
  17. Talbumrung, T., Thongpin, C., and Lopattananon, N. (2016). “Effect of Compatibilization on In-Situ Microfibrillation LDPE Reinforced PLA” Aachen-Dresden-Denkendorf International Textile Conference, Dresden, Germany, (November 24-25): 11 Pages.
  18. Dankeaw, A., Panapoy, M., and Ksapabutr, B. (2016). “Self-Standing Hydrophilically-Functionalized Electrospun Carbon Nanofibrous Fabrics Based Humidity Sensor via Microwave-Induced Chemical Treatment” 13th Eco-Energy and Materials Science and Engineering Symposium 2016, Udonthani, Thailand, (December 1-4): 145-150.
  19. Thongpin, C., Vongtiang, T., Jintanasirinurak, P., and Prasertsuk, P. (2016). “The Study of Pinari fiber Reinforced Natural Rubber:Characteristic of Pinari Fiber and Effect of Treatment on Cure and Tensile Properties” 13th Eco-Energy and Materials Science and Engineering Symposium 2016, Udonthani, Thailand, (December 1-4): 180-185.
  20. Hemsri, S., Yimyai, T.,  Panjareon, P., and Nathijulasutra, S. (2016). “Okra Pectin Based Edible Coating for Shelf-Life Extension of Green Grape” 13th Eco-Energy and Materials Science and Engineering Symposium 2016, Udonthani, Thailand, (December 1-4): 190-195.
  21. Khwanpipat, T., Thongnop, S., Trakoolnuch, K.,  Seadan, M., and Suttiruengwong, S. (2016). “Effect of Hybrid Nucleating Agents on Crystallization Behavior of Poly(lactic acid)” 13th Eco-Energy and Materials Science and Engineering Symposium 2016, Udonthani, Thailand, (December 1-4): 238-242.

2015

  1. Chokeuthaikul, A., and Chaiyut, N. (2015). “Bacterial Cellulose Fiber Reinforced Chitosan/Cassava Starch Composites” Pure and Applied Chemistry International Conference 2015 (PACCON 2015), Amari Watergate Hotel, Bangkok, Thailand, (January 21-23): 732-735.
  2. Preedasakul, J., and Chaiyut, N. (2015). “Cattail Fiber Reinforced Poly(lactic acid) Composites: Effect of Fiber Surface Treatment” Pure and Applied Chemistry International Conference 2015 (PACCON 2015), Amari Watergate Hotel, Bangkok, Thailand, (January 21-23): 736-740.
  3. Sittirug, I., Ksapabutr, B., and Panapoy, M. (2015). “Recent Progress in Synthesis of Carbon-Doped Titanate Nanoribbons via One-Step Solvothermal Method for Enhancing Visible Light Photocatalytic Activity” Pure and Applied Chemistry International Conference 2015 (PACCON 2015), Amari Watergate Hotel, Bangkok, Thailand, (January 21-23): 753-756.
  4. Dankeaw, A., Panapoy, M., and Ksapabutr, B. (2015). “Freestanding Functionalized Electrospun Carbon Nanofibrous Mats Based Humidity Sensors” Pure and Applied Chemistry International Conference 2015 (PACCON 2015), Amari Watergate Hotel, Bangkok, Thailand, (January 21-23): 855-858.
  5. Sanga, S., and Hongsriphan, N. (2015). “Chitosan Coating on Biodegradable Film Modified Surfaces by Corona Treatment” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 99-103.
  6. Popanna, A., and Hongsriphan, N. (2015). “Mechanical Enhancement of Poly(Butylene Succinate) with Commercial Synthetic Fibers” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 104-109.
  7. Kattiyaboot, T., and Thongpin, C. (2015). “Effect of natural oil based polyols on the properties of flexible polyurethane foams blown by distilled water” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 117-121.
  8. Kraitape, N., and Thongpin, C. (2015). “Influence of recycled polyurethane polyol on the properties of flexible polyurethane foams” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 122-127.
  9. Wachirahuttapong, S., Thongpin, C., and Sombatsompop, N. (2015). “Effect of PCL and compatibility content on the morphology, crystallization and mechanical properties of PLA/PCL blends” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 128-133.
  10. Lappokachai, K., and Hongsriphan, N. (2015). “Effect of Chain Extenders on Mechanical Properties of Recycled Poly(Ethylene Terephthalate)/ Polycarbonate Blend” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 145-149.
  11. Wutisart, T., Seadan, M., Suttireungwong, S., and Pivsa-Art, S. (2015). “A study of shelf-life of commercial bioplastics in real weather condition” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 172-176.
  12. Phongtongpasuk, S., Poadang, S., and Yongvanich, N. (2015). “Environmental-friendly method for synthesis of silver nanoparticles from dragon fruit peel extract and their antibacterial activities” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 177-181.
  13. Pinpueng, A., and Hongsriphan, N. (2015). “Moisture Absorption and Fertilizer Release of Poly(Butylene Succinate) Blended with Natural Absorbent for Using in Agriculture Application” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 191-195.
  14. Sittirug, I., Ksapabutr, B., and Panapoy, M. (2015). “Fabrication and photocatalytic activity of activated carbon/TiO2 double-layered films” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 214-218.
  15. Hemsri, S., Thongpin, C., Supatti, N., Manomai, P., and Socharoentham, A. (2015). “Bio-based blends of wheat gluten and maleated natural rubber: morphology, mechanical properties and water absorption” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 227-232.
  16. Talbamrung, T., Kasemsook, C., Sangtean, W., Wachirahuttapong, S., and Thongpin, C. (2015). “Effect of Peroxide and Organoclay on Thermal and Mechanical Properties of PLA in PLA/NBR melted blend” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 233-237.
  17. Poungchan, G., Panapoy, M., and Ksapabutr, B. (2015). “Flower-like ZrO2 thin film by electrostatic spray deposition for alcohol sensor application” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 238-241.
  18. Sangkharat, N., Chalermkiti, T., Ksapabutr, B., and Panapoy, M. (2015). “Fabrication of 3D nanostructured TiO2 thin films by electrostatic spray deposition and their photocatalytic activity” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 242-246.
  19. Suttiruengwong, S., Kongpean, K., Phengkhlai, O., Aeimyim, P., Chunsakul, T., Plengchronsirichai, S., Pattanakijdamrong, S., Seadan, M., and Pivsa-Art, S. (2015). “Synthesis of Polycarbonate Derived from Carbon Dioxide and Its Potential Use for Poly(lactic acid) Modification” 12th Eco-Energy and Materials Science and Engineering Symposium, Krabi, Thailand, (June 11-14): 247-250.
  20. Pivsa-Art, S., and Suttiruengwong, S. (2015). “Development of Biobased and Biodegradable Polymers for Packaging in Thailand” International Packaging Seminar 2015, The Society of Packaging Science & Technology, Japan, (July 2-3): 84-90.

2014

  1. Phuangngamphan, P., and Thongpin, C. (2014). “Thermo sensitive PU coating derived from recycled PET polyol and HDD as chain extender” 10th Coatings Science International 2014, Hotels van Oranje Noordwijk, The Netherlands, (June 23-27): 155-158.
  2. Kampangkaew, S., Thongpin, C., Hongsriphan, N., Lopattananon, N., and Santawitee, O. (2014). “Preparation of Thermoplastic starch (TPS) extrudates from Tapioca flour” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 37-39.
  3. Hemsri, S., Thongpin, C., Moradokpermpoon, N., Niramon, P., and Suppaso, M. (2014). “Mechanical Properties and Thermal Stability of Poly(buthylene succinate)/Acrylonitrile Butadiene Rubber Blend” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 46-48.
  4. Kritape, N., Leelachai, K., Kongprasert, N., Sinbuathong, S., and Thongpin, C. (2014). “Effect of Coir fiber and Betel nut fiber on Cure characteristic, Mechanical properties and Thermal ageing on NR vulcanizates” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 130-132.
  5. Kattiyaboot, T., Kessaward, R., Keawpaluek, S., Werojananunt, S., and Thongpin, C. (2014). “The Study of ENR/NBR blend: Cure Characteistic and Solvent resistance of ENR/NBR blends” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 133-134.
  6. Kritape, N., Maneelam, K., Trakuldee, J., Menwa, J., Kattiyabut, T., and Thongpin, C. (2014). “The study of SBR/NR rubber blend and foam blend: cure characteristic and mechanical properties” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 140-142.
  7. Hemsri, S., Thongpin, C., Techasukhato, N., Kaewpornmongkol, N., and Pliansakun, S. (2014). “Preparation and Mechanical Properties of Polymer Blend of Wheat gluten and Epoxidized Natural Rubber” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 146-148.
  8. Duangjamkarn, P., Kulsetthanchalee, C., and Threepopnatkul, P. (2014). “Utilization Study for Styrene Acrylonitrile Off-Grade Resins” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 161-163.
  9. Yimsara,N., Kulsetthanchalee, C., and Threepopnatkul, P. (2014). “Properties of Flame Retarded HIPS with Impact Modifier for Mechanical Improvement” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 163-166.
  10. Sanyarak, A., Suttiruengwong, S., Seadan, M., and Pivsa-Art, S. (2014). “Effect of Polyamide4 on the Properties of Poly(lactic acid)” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 184-187.
  11. Direksilp, C., and Threepopnatkul, P. (2014). “Mechanical and Thermal Properties of Polystyrene Composites from Expanded Polystyrene Off-Grade Filled with Modified Montmorillonite” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 200-203.
  12. Kaewjinda, E., Threepopnatkul, P., and Sittattrakul, A. (2014). “Properties of Poly(ethylene-co-methyl acrylate)/Thermoplastic Starch Films Containing Antioxidant” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 207-209.
  13. Suphanil, T., Thongpin, C., and Lopattananon, N. (2014). “Tensile Properties of Woven Natural Fibers Based Poly(lactic acid) Composite Material” The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (July 6-11): 210-212.
  14. Nimnuan, P., Panapoy, M., and Ksapabutr, B. (2014). “Preparation and performance of nickel oxide thin film thermistor by electrostatic spray deposition technique” 36th International Symposium on Dry Process (DPS 2014), Annex Hall, PACIFICO YOKOHAMA, PACIFICO Convention Plaza, Yokohama, Japan, (November 27-28): 73-74.
  15. Wongchaichana, T., Pongsa, U., Lerdwijitjarud, W., and Somwangthanaroj, A. (2014). “Effect of Blown Film Processing on Properties of Poly(Lactic Acid)/Natural Rubber Film” Pure and Applied Chemistry International Conference 2014 (PACCON2014), (January 8-10): 642-645.
  16. Jaitrong, N., Pongsa, U., Lerdwijitjarud, W., and Somwangthanaroj, A. (2014). “Effect of Poly(Lactic Acid) / Natural Rubber/Thermoplastic Starch Blown Films on Morphology, Gas Permeability and Mechanical Properties” Pure and Applied Chemistry International Conference 2014 (PACCON2014), (January 8-10): 683-686.

2013

  1. Timasart, P., and Chaiyut, N. (2013). “Preparation and Properties of PLA/PCL Composite for Bone Tissue Engineering Application” Pure and Applied Chemistry International Conference 2013 (PACCON), Bangsaen Beach, Thailand, (January 23-25): 575-579.
  2. Prukwarun, W., and Phupaichitkun, S. (2013). “Effect of Cell Structure and Porosity on Viscous Loss and Inertial Loss Coefficientin CFD Simulation” Pure and Applied Chemistry International Conference 2013 (PACCON), Bangsaen Beach, Thailand, (January 23-25) : 692-696.
  3. Samngamnoi, P., Lerdwijitjarud, W., and Sittattrakul, A. (2013). “Reinforcing Thermoplastic Starch with Water Hyacinth” Pure and Applied Chemistry International Conference 2013 (PACCON), Bangsaen Beach, Thailand,(January): 1021-1024.
  4. Preechanon, S., Lerdwijitjarud, W., and Sittattrakul, A. (2013). “Mechanical Properties of Epoxidized Natural Rubber/Thermoplastic Starch Blend Plasticized with N,N-BIS(2-Hydroxyethyl)Acetamide” Pure and Applied Chemistry International Conference 2013 (PACCON), Bangsaen Beach, Thailand, (January 23-25).
  5. Sangampai, N., Jeungsawad, N., Sukwanichwichai, P., Rodsanthia, R., and Thongpin, C. (2013). “Effect of ENR on Cure Characteristic, Mechanical and Thermal Properties of NR/NBR Blend” Pure and Applied Chemistry International Conference 2013 (PACCON), Bangsaen Beach, Thailand, (January 23-25).
  6. Bunlengsuwan, P., Srisuk, S., Wachirahuttapong, S., and Thongpin, C. (2013). “Effect of Molecular Weight of PEG on Structural and Morphological Change in PLA/PEG Blend” Pure and Applied Chemistry International Conference 2013 (PACCON), Bangsaen Beach, Thailand, (January 23-25).
  7. Sotho, K., Seadan, M., and Suttiruengwong, S. (2013). “Effect of Glycerol and Reactive Compatibilizers on Poly(Butylene Succinate)/Starch Blend” 4th International Conference on Biodegradable and Biobased Polymers (BIOPOL2013), Rome, (October 1-3).
  8. Khankrua, R., Pivsa-Art, S., Hiroyuki, H., and Suttiruengwong, S. (2013). “Effect of Chain Extenders on Structural and Mechanical Properties of Poly(Lactic Acid) Melt-Processed at High Temperatures” 4th International Conference on Biodegradable and Biobased Polymers (BIOPOL2013), Rome, (October 1-3).
  9. Thongpin, C., and Pongthanayuth, K. (2013). “Effect of Organic Peroxide on PLA Modified by NR: Mophology, Thermal Stability and Crystallization Behavior” 4th International Conference on Biodegradable and Biobased Polymers (BIOPOL2013), Rome, (October 1-3).
  10. Muikaew, N., Chawkondee, K., Choeykhunthod, W., Hemsri, S., and Thongpin, C. (2013). “Toughened Biopolymer Blend of Wheat Gluten and Modified Natural Rubber” 4th International Conference on Biodegradable and Biobased Polymers (BIOPOL2013), Rome, (October 1-3).
  11. Lorkit, P., Panapoy, M., and Ksapabutr, K. (2013). “Iron oxide-based supercapacitor from ferratrane precursor via sol-gel-hydrothermal process” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21): 550-555.
  12. Singsang, W., Panapoy, M., and Ksapabutr, K. (2013). “Facile one-pot synthesis of freestanding carbon nanotubes on cellulose-derived carbon films for supercapacitor applications: effect of the synthesis temperature” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21) : 544-549.
  13. Panyasart, K., Chaiyut, N., and Santawitee, O. (2013). “Effect of surface treatment on the properties of pineapple leaf fibers reinforced polyamide 6 composites” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand,(December 18-21.): 415-420.
  14. Wattananawinrat, K., Threepopnatkul, P., and Kulsetthanchalee, C. (2013). “Morphological and Thermal Properties of LDPE/EVA Blended Films and Development of Antimicrobial Activity in Food Packaging Film” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21).
  15. Tipparat, W., Chaiyut, N., and Jrirasripongpun, K. (2013). “Preparation and properties of PLA/PCL blends for bone tissue engineering application” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21): 394-399.
  16. Promnimit, A., and Chaiyut, N. (2013). “Preparation and properties of PVA/Chitosan blend films”, 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21) : 377-381.
  17. Kampangkaew, S., Thongpin, C., and Santawitee, O. (2013). “The synthesis of Cellulose nanofibers from Sesbania Javanica for filler in Thermoplastic starch” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21).
  18. Phuangngamphan, P., and Thongpin, C. (2013). “Synthesis of Polyurethane Containing Diacetylene unit using PET polyol as Chain Extender” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21).
  19. Nanthananon, P., Seadan, M., Sripethdee, C., Pivsa-Art, S., and Suttiruengwong, S. (2013). “Effect of Reactive Aliphatic Amides as Nucleating Agent on Crystallization of Poly(L-lactic acid)” 11th Eco-Energy and Materials Science and Engineering Symposium, Phuket, Thailand, (December 18-21).

2012

  1. Sangmanee, C., and Phupaichitkun, S. (2012). “Effects of Viscosity Model on Flow Pattern of Polymer Melt on Ansys Software” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13) : 370-373.
  2. Towangjohn, N., and Phupaichitkun, S. (2012). “Fracture Surface Simulation of Composites Using Ansys Program” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13) : 402-405.
  3. Phermtermsin, A., Tantayanon, S., and Threepopnatkul, P. (2012). “Flame Retardancy Enhancement of Polycarbonate” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13).
  4. Sotho, K., KhanKrua, R., Seadan, M., and Suttiruengwong, S. (2012). “Influence of Reactive Agent on Properties of Poly(Butylenes Succinate)” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13).
  5. Rojsatean, J., Suttireungwong, S., Saedan, M. (2012). “Morphological, Mechanical and Thermal Properties of Poly(Styrene-Co-Acrylonitrile) and Natural Rubber” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13).
  6. Pinsurong, N., Suttiruengwong, S., and Seadan, M. (2012). “Morphology and Mechanical Properties of the Tertiary Blend of Poly(Lactic Acid) / Thermoplastic Starch / Soy Protein Concentrate” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13).
  7. Baitahe, P., Lerdwijitjarud, W., and Sittattrakul, A. (2012). “N,N-Bis(2-Hydroxyethyl)Acetamide As a Plasticizer for Thermoplastic Tapioca Starch” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13).
  8. Suttireungwong, S., Muanprasat, D., Chareonpanich, M., and Seadan, M. (2012). “Supercritical Assisted Phase Inversion Process for 3-Dimensional Biodegradable Polymer Scaffolds Preparation” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13).
  9. Rodsunthia, R., and Thongpin, C. (2012). “The Effect of PEG on Cure Characteristic and Mechanical Properties of Si-GEL Derived from Hull ASH/NR Composite” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13).
  10. Khankham, P., Lerdwijitjarud, W., and Sittattrakul, A. (2012). “The Effect of Reaction Conditions on the Modification of Octenylsuccinate Anhydride Starch to Its Dialdehyde Derivative” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13).
  11. Wiriya-Amornchai, A., Pattanatabutr, P., and Hongsriphan, N. (2012). “Thermal Stability of Natural Dyed Wood Fibers for using in Wood-Filled Biocomposite” The 6th Pure and Applied Chemistry International Conference (PACCON 2012), Chiang Mai, Thailand, (January 11-13) : 246-249.
  12. Deeswadi, S., Chaiyut, N., Panapoy, M., and Ksapabutr, B. (2012). “Pyrolyzed Macadamia Nut Shell Impregnated with KOH as Heterogeneous Base Catalyst for Biodiesel Production” International Conference on Green and Sustainable Innovation 2012, Le Meridien Chiang Mai Hotel, Chiang Mai, (May 25-26.): 164-169.
  13. Kololkijwong, M., Hongsriphan, N. and Thongpin, C. (2012). “Effect of Surface Treatment on Properties of PBS/COIR Fiber Biocomposites” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8).
  14. Chinda, C., and Hongsriphan, N. (2012). “Ductility Enhancement of Poly(Butylene Succinate)/Poly(Lactic Acid) Blend by the Use of Glycidyl Methacrylate” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8).
  15. Chalermkiti, T., Panapoy, M. and Ksapabutr, B. (2012). “Fabrication of Samarium Doped Ceria Electrolyte on Rough Glass Substrate with High Electrical Conductivity by Electrostatic Spray Deposition for Intermediate Temperature Solid Oxide Fuel Cell” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8).
  16. Thongpin, C. and Rodsunthia, R. (2012). “Investigation of Si-Gel-NR Interaction in Si-Gel/RN Vulcanizate using Dynamic Mechanical Thermal Analysis” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8).
  17. Homklin, R., and Hongsriphan, N. (2012). “Mechanical and Thermal Properties of PLA/PBS Co-Continuous Blends Adding Nucleating Agent” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8).
  18. Sriakkarakul, M., and Hongsriphan, N. (2012). “Moisture Absorption and Fertilizer Release of Poly(Butylene Succinate) Blended with Fertilizer Loaded Superabsorbent Polymer for Using in Agriculture Application” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8).
  19. Wiwatkanjana, P., and Suttiruengwong, S. (2012). “Physico-Chemical Properties of Surface Modification of Silica Based on Rice Husk Ash Sources” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8).
  20. Pongtanayut, K., Thongpin, C. and Santawitee, O. (2012). “The Effect of Rubber on Morphology, Thermal Properties and Mechanical Properties of PLA/NR and PLA/ENR Blends” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8).
  21. Khankrua, R., Pivsa-Art, S., Hiroyuki, H., and Suttiruengwong, S. (2012). “Thermal and Mechanical Properites of Biodegradable Polyester/Silica Nanocomposites” 10th Eco-Energy and Materials Science and Engineering Symposium, Ubon Ratchathani, (December 5-8).
  22. Thongpin, C., Promcharoen, P., Sujeerakulkrai, S., and Paengsri, S. (2012) “Thermal Stabilization and Mechanical Properties of Dynamic Vulcanization of NR in PS Melt Blending with and without OMMT” The Polymer Processing Society 28th Annual Meeting, Pattaya, (December 11-15).

Update : 8 SEP 2022